Wed Feb 15, 2012 9:59 am by MrPharmer2012
Hey guys does anyone know anyone that could make me a key for my cylinders, I purchased 2 removed from cylinder and three in the lock, I spent all last night working on them I got the two out of lock to the picked open state, and managed to get the one 831 to control after breaking two peterson reaches and a short hook in the keyway, it kept getting wedged between the warding. Any help would be appreciated or if you know of a key blank that can be filed down to fit in keyway, I own one key for my 826 I have a locksmith that will let me pin them all the same for free but would like to have some keys, Do you guys feel that a clamshell method could be used with a jb weld type molding material and then use brass shavings from key maker to pour brass key with mold, not sure if that would work or not.
I included a picture of the third cylinder tore down to show what drivers were used a while back I was asked to do this for my 826 which had all standard drivers, this cylinder has two mushroom pins, I can tear down the other two if you guys would like to see those as well.
Also if anyone knows of someone that could open my 2 remaining unopened 831's let me know LSA suggested framerfreak, I gave up on them last night after breaking three picks in keyway, I may give another go in next few days but dont really want to sacrafice any more petersons
You do not have the required permissions to view the files attached to this post.
Last edited by
MrPharmer2012 on Sun Feb 19, 2012 3:28 pm, edited 2 times in total.