Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares
Posts: 2167
Joined: Sun Jul 24, 2011 11:16 am
Location: Canada
ISEO Perfecta? "High security" door lock gutted
Saw this on ebay and decided that it looked pretty damned sweet so I bought one. Excuse the wobbly video and crappy pictures, i have 2 broken hands at the moment.
Thumbs posted, click them for bigger images.
The box:
Inside of the cover:
Here is how the bolts are retracted and extended. Im using the knob on the back to turn it.
Lock cylinder in neutral position:
With the key inserted. Notice the little tab pushes out to interact with the...cam?
Baco of cylinder cover taken off:
Keyway:
Taking it apart:
Start by taking out the spring:
Then this bar which is what pops out and turns the cam:
It has this washer on it that the spring pushes against to hold it into the cylinder:
Pull out the grey round piece, it is what holds the springs and "top" pins. You could do this the easy way and poke it from the keyway with the cylinder on its side and not dump everything like i did.
The base with a spring pin in place. The springs and pins are attached to each other. Only the 4 pins on the side are used in the lock, the top one provides tension between the 2 cylinders.
Where the key intercts the pins.
The pins. The thin part is affecte by the key, while the wider part determines how deep the key is cut.
With the pins in the correct place and key inserted:
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(
If life gives you melons, you might be dyslexic.