Requests for Lock Codes

[10ringo10]

Heard these where on software now - mid to late 2014 New series Fastec fic CW401 TO CW434

There was a difference of opinion - on this as the full set was purchased and decode by eye on another site
in regards to the cuts being 3s or 4s ?? once decoded correct or not - no space or depth info or blank used
was mentioned lol

IE : CW 401 12422 or 12322

[macgng]

401 = 12322

Hope that answers your questions.

[10ringo10]

401 = 12322

Hope that answers your questions.

Smashing - only printed them off today so will need to change the 4 depths to 3s on list -
so there is no 4 cuts on the series and code cw 421 was missing !
Reading on there site its a different lock cylinder - so guess its not same blank required as the CF-EF-HF series used
And S/D won,t be the same as old series
so Just need the new space and depth now - blank used macgng ..... cheers buddy

[macgng]

If you wait a bit I can get you d&s info for the series when I get home, but I'm on my iPhone now.

[10ringo10]

Thanks - got pm this morning mac
L@@ks to be same depth and space used as previous FIC codes used - was surprised at this
possible reason why they where not mentioned

[macgng]

sent you an email

glad to help! ... just paying you back for all those Yale padlocks you looked up for me years ago

[10ringo10]

interesting - journey from the blank required on this lock

when I cross referenced this its the JMA fcs-1d - ilco 1681 a lot of good stuff on mysecurity pro on blank

Good one to stock ! if you have trailers - RV in your area or district or selling worldwide

thanks - mac

[castle 2]

Bump for anyone that didn't see this.... just renewed my subscription.

if anyone has blind codes i can look em up for ya... thanks, and if they work, donate to the forum

Do they have any information relating to ASSA / RUKO scd cylinders? I think they're 700s the Assas....

TL385752 is one of the codes on the cylinder itself...?

[macgng]

nope, sorry.

[Werewolf]

I don't get many Assa's , but i've seen some that were stamped on the back with a direct code.
So if it is a 6 pin cylinder , 385752 may just be the cuts.
And the TL will indicate the key profile. But I can't find anything in Instacode or Silca software.

Edit: Börkey key blank 1524 1/2 / 3 fits a TL keyway for ASSA 600

[GWiens2001]

Sezam code 43124

Gordon