DOM dimple lock IC (Pic heavy)
Sidebar is only 2 pins
There are also passive side pins and bottom pins which come in at a 45 degrees. Bottom pin dimples are on the left side of the keys. There is also an active element in the 7th chamber that interacts with the ball bearing.
Side dimples
You can see in the 7th chamber is cut across for the active element bar.
And the bar
Side pins. You can see the bottom pins and they are 45 degrees off instead of 90. The side and bottom pins are smaller than the top pins and are offset so that the drivers will not fall in.
Side
Bottom
Here are the bottom pins on the top and the single side pin on the bottom row.
The pins!! Nasty little buggers. All of the master wafers have holes through the middle of them. As you can see there are spools, barrels and a single mushroom pin in there.
On the left is a DOM pin and on the right is a standard Best SFIC pin.
And finally, how the interactive element works with the ball bearing in the key:
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(
If life gives you melons, you might be dyslexic.