Wed Aug 11, 2010 9:05 pm by KokomoLock
Here she is in all her high security unpickable greatness! Corbin Russwin Emhart 6 pin rim cylinder with interlocking pins. The key has angled cuts just like a Medeco, but have no rotation stops on them, the pin can spin 360 degrees and really screw you up. Looks like we need some interlocking pin smilies
!! Have to thank Tooly for finding this lock in a drawer of old locks. It had no key so I used a 1011MK blank and a Medeco set up on the code machine and made a key for it then made the notches in the bottom of the key for the top pin tabs to pass through. They are no longer made as Medeco sued them because Corbin used the same angled cuts (axial rotation) as Medeco. The plug will not come out the front because of the grooves in the plug, the pins must be removed from the top then the plug removed as usual.
Rim Cylinder with key.
Pins
Plug with grooves for top pin tab
Top pin
Bottom pin
Interlocked
Plug with correct key
Interlocked in correct position
Interlocked incorrect position
Anti-drill disc
Slots in bottom of key
Angled cuts on key