s&g 6730-a - nose doesn't touch cam
I've tried searching for 6730-A but can't seem to find this information...
I got a 6730-A which does what I think an "ideal" safe combination lock should do but makes it difficult/impossible? for me to try to crack it.
The nose does not touch the cam. Is this a "new" design feature? The lock was made in 2020.
If I set the combination and then enter it the lock functions as it should but when trying to use the typical method of figuring out the combination it is impossible because the nose comes really really close to the cam but doesn't touch it.
I got the lock used on eBay so I don't know if this lock was modified by someone, is broken (in a good way) or if this is a design feature.
If I enter two numbers of the combination correctly I can get the nose to drop down low enough to just barely make contact that can be felt but any correct number alone does not.
I doubt you could fit a business card thickness in the gap between the nose and the cam but there IS a gap unless you have a couple correct numbers already dialed in.
Any ideas?