Can someone explain HOW tubular lock picks work
13 posts
• Page 1 of 1
I'm having trouble understanding how and why tubular lock picks work? I follow the procedure, understand how the pick work, but can't wrap my head around the physics of it. Can someone explain the concept.
Re: Can someone explain HOW tubular lock picks work
Welcome to the forum, Check out these animations they show how most locks work.
https://imgur.com/gallery/iyhqRvK
https://imgur.com/gallery/iyhqRvK
(17:44:28) HAL 9000 Sez: LockSport is full of children who throw fits because low priced low security products sold in discount department stores do not meet their arbitrary expectations.
Re: Can someone explain HOW tubular lock picks work
This video has a transparent lock in it so you can see how it works if it's not clear from the animations. There are many others as well. https://m.youtube.com/watch?v=eNXhKwiO1OA
My youtube channel: https://youtube.com/c/edocdab
Re: Can someone explain HOW tubular lock picks work
I''ve watched numerous videos, but I still don't understand how and why the lockpicking tool pins push back to the shear line in varied amounts. Springs are all the same tension, DriverPin/KeyPin overall are all the same length, so I would expect the pins on the tool to slide back in equal amounts.
Re: Can someone explain HOW tubular lock picks work
Because of difference in friction. That comes from rotating the core as if it would open. One binds stronger than the others. So one pin doesn't want to move as easily as the others even though the springs are the same. The animations show that. It's why lockpicking works.
My youtube channel: https://youtube.com/c/edocdab
Re: Can someone explain HOW tubular lock picks work
Its a kind of... magic
Re: Can someone explain HOW tubular lock picks work
I think I understand where you're coming from. I understand how single pin picking a tubular lock works, just like normal picking. But, try oscillating the plug of a cylinder lock while picking and you'll always be losing the progress as the pins go back to their resting positions as soon as the tension is reversed. So, the question is, when using a tubular lock pick in a rocking/oscillating technique, why do the pins stay at the shear line when they reach it, even though the plug is moved back past the neutral position after each change in direction?
Re: Can someone explain HOW tubular lock picks work
Because each pin is kept at its depth by the friction of the wires. And, just to be clear, it doesn't work every time. You have to try and eventually reset the tool and try again.
Cheers
Cheers
Re: Can someone explain HOW tubular lock picks work
Indeed. The tool's wires don't get the resistance from friction for pins at the shear line, so if you stop tensioning and re-tension those wires push those pins back to shear. Other pins will bind and cause friction and place the other wires correctly. It's impressioning, if you need a search term for more info.
My youtube channel: https://youtube.com/c/edocdab
Re: Can someone explain HOW tubular lock picks work
Let's see if my train of thought is on the right track. Did some more thinking about it. When the wires push down on both the key pins and driver pins initially, the key pins are blocking the shear line and the holes in the plug and shell are aligned at this point. The springs are able to push up on the stack, moving the wires back. This continues until the driver pins get stuck at the shear line (caused when the tool is rotated back and forth) and the spring stops pushing, and the wires stop moving. At the same time, the pin stacks (and holes) that are still aligned, continue moving until they too reach the shear line, and then they get hung up and stop moving as well. The back and forth movement is critical here because its this jiggling that causes the driver pins to get trapped. Am I close in my thinking?
Re: Can someone explain HOW tubular lock picks work
Correct!
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
Martin Hewitt, Investigator Chronicles of Martin Hewitt
Re: Can someone explain HOW tubular lock picks work
Close, but not quite.
The tension on the pick should be just slightly more than the springs in the lock can push back. When the pick is turned, if the key pin is blocking the shear line (binding), then it will torque/shift very slightly , exerting more pressure on the pick at that location than the friction, forcing that arm of the pick back slightly. When the key pin is at the shear line, then it does not get torqued/shifted by the differences at the shear line, so the pins are not torques/shifted. Therefore the pick is not moved at that location.
Using a tubular lock still takes a little practice. You need to adjust the nut just right for that particular lock.
Also, some of the better tubular locks will use multiple strengths of springs, so no one setting will be right for all the springs. That makes it more difficult to use a tubular lock pick.
If you make and use a manual tubular lock tensioner/turning tool, then the spring differences won't affect picking.
Gordon
The tension on the pick should be just slightly more than the springs in the lock can push back. When the pick is turned, if the key pin is blocking the shear line (binding), then it will torque/shift very slightly , exerting more pressure on the pick at that location than the friction, forcing that arm of the pick back slightly. When the key pin is at the shear line, then it does not get torqued/shifted by the differences at the shear line, so the pins are not torques/shifted. Therefore the pick is not moved at that location.
Using a tubular lock still takes a little practice. You need to adjust the nut just right for that particular lock.
Also, some of the better tubular locks will use multiple strengths of springs, so no one setting will be right for all the springs. That makes it more difficult to use a tubular lock pick.
If you make and use a manual tubular lock tensioner/turning tool, then the spring differences won't affect picking.
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
Re: Can someone explain HOW tubular lock picks work
GWiens2001 wrote:Close, but not quite.
The tension on the pick should be just slightly more than the springs in the lock can push back. When the pick is turned, if the key pin is blocking the shear line (binding), then it will torque/shift very slightly , exerting more pressure on the pick at that location than the friction, forcing that arm of the pick back slightly. When the key pin is at the shear line, then it does not get torqued/shifted by the differences at the shear line, so the pins are not torques/shifted. Therefore the pick is not moved at that location.
Aha! Something wasn't quite adding up before. Now it makes sense. Thank you!
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users