Page 1 of 1

How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 12:39 am
by Riyame
Well I had to talk a guy though how to disassemble a S&G 826 padlock on youtube but he still couldn't get it then asked me to make a video. Then he wanted to know how to take apart an 833.... So I made a video on that as well.

I figure the 826 video will be more helpful to people here since they are a royal pain in the *&S sometimes even when you do know how to do it.





Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 3:30 am
by MBI
Excellent. Do you also plan to do videos for the Hi-Shear and 951?

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 3:32 am
by Riyame
As soon as I get a hi shear in I will. The 951 is the exact same as the 833 but I dont have mine any more.

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 3:38 am
by MBI
But... how could the 951 be the same as the 833? It's 118 more.

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 4:16 am
by Riyame
~Throws something shiny past MBI~

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 6:00 am
by selim
Very nice riy, thanks, and I hope to get one someday

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 7:32 am
by GWiens2001
MBI wrote:But... how could the 951 be the same as the 833? It's 118 more.


Yes, but 118 is divisible by 59. They switch between the two methods every 59 number changes! :roll: :D

Gordon

P.S. Nice vids, Riy. The 826 is a bit of a bother to reassemble. Glad to know it is not just me! ;-)

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 9:23 am
by Oldfast
Very good Eric. I'm sure this'll be helpful for people.
I remember the first time I tried to put the locking bar BACK IN, lol.
So funny how sometimes it pops right in, and other times give's ya hell.

Re: How to disassemble S&G 826 and 833 padlocks

PostPosted: Sun Sep 15, 2013 4:30 pm
by macgng
very nice! thanks for the 826!