FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

What have you picked today

<<

jharveee

Prolific Poster

Posts: 758

Joined: Thu Aug 22, 2013 3:14 pm

Location: San Marcos, Ca.

Post Sun May 14, 2017 4:05 pm

Re: What have you picked today

AmericanXPuckX1.jpg

American Puck Lock.
It put up a battle, But I won.
You do not have the required permissions to view the files attached to this post.
<<

jharveee

Prolific Poster

Posts: 758

Joined: Thu Aug 22, 2013 3:14 pm

Location: San Marcos, Ca.

Post Sun May 14, 2017 6:39 pm

Re: What have you picked today

OldFord.jpg

Old Ford van using Lishi pick
You do not have the required permissions to view the files attached to this post.
<<

adi_picker

Familiar Face

Posts: 50

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Tue May 16, 2017 8:33 am

Re: What have you picked today

Kwikset Smartkey Padlock

Image

adi_picker
<<

tpark

Contributor
Contributor

Posts: 195

Joined: Fri Nov 13, 2015 10:17 pm

Location: Alberta, Canada

Post Tue May 16, 2017 4:29 pm

Re: What have you picked today

adi_picker wrote:Kwikset Smartkey Padlock

Image

adi_picker

Good job on getting that open! Those things can be time consuming.
<<

Oldfast

User avatar

OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer

Posts: 4011

Joined: Thu Mar 31, 2011 3:16 pm

Location: Michigan

Post Wed May 17, 2017 4:05 am

Re: What have you picked today

Some nice pickin' here guys!

Adi_picker... you've been busy!!

And jharveee... nice to see ya :D
Gotta love the American Puck.
" Enjoy the journey AS MUCH as the destination."
<<

Turtle0Monkey

User avatar

Familiar Face

Posts: 52

Joined: Tue Feb 14, 2017 3:29 pm

Location: Ohio

Post Fri May 19, 2017 3:45 pm

Re: What have you picked today

Picked a challenge lock from Ceefus. Thanks again buddy!

<<

MartinHewitt

User avatar

Active Member

Posts: 383

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Wed May 24, 2017 8:11 am

Re: What have you picked today

Next safe key lock. My first EN1300 classified lock. It is a STUV 4.19.92. Took me on my first real attempt about a quarter of an hour. (made the mistake to not look on the clock) Proceeded as recommended by ratlock and it was open.
You do not have the required permissions to view the files attached to this post.
<<

ratlock

User avatar

Familiar Face

Posts: 202

Joined: Sat May 07, 2016 8:41 am

Location: Scotland

Post Wed May 24, 2017 10:51 am

Re: What have you picked today

Well done.
<<

Ronchopathe

User avatar

Familiar Face

Posts: 29

Joined: Mon Jan 30, 2017 4:51 pm

Location: Occitanie - France

Post Wed May 24, 2017 12:52 pm

Re: What have you picked today

Congratulations! And interesting assembly. :cool:
<<

MartinHewitt

User avatar

Active Member

Posts: 383

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Wed May 24, 2017 1:38 pm

Re: What have you picked today

Thanks!
<<

dontlook

User avatar

Contributor
Contributor

Posts: 33

Joined: Tue Feb 26, 2013 4:53 am

Location: Massachusetts

Post Sat May 27, 2017 3:00 am

Re: What have you picked today

Yesterday I picked my LOTO lock three times. I have been working on the LOTO locks for a while.
This bitting was easier than the one that has been escaping me for a year(but that one got spun, and dropped the pins).
Image

Today I picked this American 1100(twice). The bitting is high low high low (although not too far apart).
Image
<<

MartinHewitt

User avatar

Active Member

Posts: 383

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Sat May 27, 2017 12:28 pm

Re: What have you picked today

The next one. The STUV was easy. With reshuffled levers it took me 7 minutes to open it. Don't know how they managed to certify it. This time it was a real safe lock, a Cawi Optima 2648. Took me 2 hours 53 minutes. There are worlds between these two locks.
You do not have the required permissions to view the files attached to this post.
<<

MartinHewitt

User avatar

Active Member

Posts: 383

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Wed May 31, 2017 9:54 pm

Re: What have you picked today

Astonishing how quick there are improvements. First opening 2:53. Second opening after a lever shuffle 1:20. Now after a shuffle 0:43.
<<

adi_picker

Familiar Face

Posts: 50

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Mon Jun 05, 2017 11:24 am

Re: What have you picked today

S&G 7 Lever

Image

More levers inside this lock than I could poke a stick at! But not a pick! I used a Prybar and a Gem to open this one.

Sargent Keso

Image

In the above image, you can see where I drilled the dimple that retains the outer cover and hence the springs and pins, and replaced it with a little grub screw. Dont know why I continue to want to monkey around inside these dimple locks, I always end up regretting it, and putting it aside to be re-assembled some months later when I have the time. I had intended to take some gut shots for everyone, but it never eventuated, as I wanted to get it back together so I could pick it, given my recent success with other dimples.

adi_picker
<<

adi_picker

Familiar Face

Posts: 50

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Mon Jun 05, 2017 12:08 pm

Re: What have you picked today

And another!

This is an 8 pin radial dimple lock from a car steering wheel lockout, like a ClubLock or such. 2 pins stacked vertically at each 1.30, 4.30, 7.30 and 10.30.

Image

Image

In this lock the centre post remains static while the middle ring rotates around it. To tension it I made a custom tubular lock style tension tool to fit.

adi_picker
PreviousNext

Return to Lock Picking

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware