.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Mon Sep 07, 2020 11:16 am**

I have a number of ancient Sager cylinder locks that I'm planning on rekeying. I know I can pretty much just pick any bottom pin lengths I want. But if possible, just for the heck of it, I'd like to use factory-spec pin lengths.
Does anyone have any info on the official pin specs for these Sager cylinder locks?

Posted: **Mon Sep 07, 2020 11:46 am**

To save you asking this for every lock type, http://www.hudsonlock.com/uploads/7/0/1/1/70116369/dsdmfg.pdf this file covers more lock brands than you could name.

Gordon

Posted: **Wed Sep 09, 2020 5:09 pm**

our HPC C57 says Yale, Sager, and Barrows so that's what I would use.

Posted: **Thu Sep 10, 2020 11:38 am**

I agree that Yale pins are correct. @ .015 increments as follows........ 0 = .200 1 = .335 2 = .320 3 = .305 4 = .290 5 = .275

6 = .260 7 = .245 8 = .230 9 = .215 Sager was a division of Yale iirc.

Posted: **Thu Sep 10, 2020 4:14 pm**

Yale is .019 or .025 though...

Posted: **Thu Sep 10, 2020 5:49 pm**

Right jeff..... I don't know why I went with .015...Another senior moment i guess.

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Official pin specs for Sager cylinder locks?

Official pin specs for Sager cylinder locks?

Re: Official pin specs for Sager cylinder locks?

Re: Official pin specs for Sager cylinder locks?

Re: Official pin specs for Sager cylinder locks?

Re: Official pin specs for Sager cylinder locks?

Re: Official pin specs for Sager cylinder locks?