Page 1 of 1

Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Mon Aug 06, 2012 2:33 pm
by MrPharmer2012
Received My very First Trioving in the mail on the same day as my new petersons from Jailersmith so I had to test out my new picks. These things are tricky as hell to pick i tried and tried on and off the first day with no success saturday didnt touch it at all on sunday and picked it up this morning with a new tactic. I figure since you have to pick all the pins several times to get above the double spools in each cylinder why not first rake with light tension with the ripple to push the pins up high past as many double spools as possible then go back and correct with the hook varying the tension as needed to drop or set pins, this strategy worked had it open in just a few minutes while walking around picking up my daughters stuff at the house. For me it always seems like the locks open beter when I stop thinking/trying so hard and just pick while doing another activity. Does anyone know how to pull the cylinder from these padlocks or does anyone have the ability to make a key for it now that it is in picked state
Thanks
Pharmer
IMG_3436.JPG

IMG_3437.JPG
IMG_3438.JPG

IMG_3439.JPG

IMG_3434.JPG

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Mon Aug 06, 2012 2:35 pm
by mech
nice work, alot of times triovings will pick a particular way and everything just locks up! absolutly nuts to pick lol, well done.

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Mon Aug 06, 2012 8:36 pm
by MrPharmer2012
Hey mech I removed set screw but I'm scared that if I pull cylinder I wont e able to put back together since u ant use plug follower is there a way to disassemble and reassemble this I see the cylinder caps but if I push those thru they wont be able to be re used right really want to see the internals of what I picked it was a great challenge and do you know of anyone with a blank so that I can make a key

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Mon Aug 06, 2012 8:46 pm
by mister sour
you bought that off ebay from traderhill, didnt you?

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Mon Aug 06, 2012 8:47 pm
by MrPharmer2012
Yep $25 shipped can't beat that

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Tue Aug 07, 2012 8:53 am
by Oldfast
I've never owned or tried to pick one yet. But considering what I've heard & read about them....

it's impressive to see you holding an open one in just a couple days of trying. Nice work man!

Re: Wheres the Trioving Thread- Picked My 1st Trioving 7 pin

PostPosted: Tue Aug 07, 2012 11:09 am
by jailersmith
Too Cool for words. Glad the picks found a good home.