MONSTER MASTER MA-19
Posted: Thu Apr 29, 2010 5:52 pm
yeah master locks are junk. they are all easy to pick,right?
WRONG!
i finally got my hands on one of these key-retaining
3 of the six cuts are 9's two cuts are zeros , and one is a #4 cut.
if you look at the keyway you can see the 9 cuts bottom out against the top of the warding,leaving no option but to attack the pins from the side,with a very thin pick.
as you can see this big lock somewhat dwarfs the S&G environmental lock
the keypins in this lock are stainless,and it carries no security pins,but was still a pretty tough pick....
(one very camera-shy lock ,for a master,but i will nail it on cam soon.)
WRONG!
i finally got my hands on one of these key-retaining
monsters,and was confronted with a bitting
and keyway/warding issue
.
3 of the six cuts are 9's two cuts are zeros , and one is a #4 cut.
if you look at the keyway you can see the 9 cuts bottom out against the top of the warding,leaving no option but to attack the pins from the side,with a very thin pick.
as you can see this big lock somewhat dwarfs the S&G environmental lock
the keypins in this lock are stainless,and it carries no security pins,but was still a pretty tough pick....
(one very camera-shy lock ,for a master,but i will nail it on cam soon.)