Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Fri Mar 24, 2017 4:10 pmTexas JIM challenge Lock
https://youtu.be/-wGtQm-UAfE
https://youtu.be/-wGtQm-UAfE
JP MCPINNING CHALLENGE LOCK
https://youtu.be/LLTaAunozJc
.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!
A Discussion Forum For Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, Lockpicks, cutaways, and security. Simply The Best Lockpicking Forum Around!
https://keypicking.com/
Chris Ahrens Lockpicking heavens gate YouTube channel
Page 1 of 1
Posted: Fri Mar 24, 2017 4:10 pmRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Sun Mar 26, 2017 6:28 amRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Tue Mar 28, 2017 11:17 amRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Tue Mar 28, 2017 11:20 amASSA TWIN V10
Posted: Wed Jul 12, 2017 2:40 pmRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Wed Jul 12, 2017 8:56 pmThat's some wonderful picking, Chris! You really do have the gift man!
When you picked your Twin 6000s with Gin-Bottle spools did you find that the spools bottomed out only after you set the sidebar? Which is to say, did you fall into a deeper false after picking into the countermilling trap and then setting the sidebar? I found this to be the case, and was wondering about your experience.
When you picked your Twin 6000s with Gin-Bottle spools did you find that the spools bottomed out only after you set the sidebar? Which is to say, did you fall into a deeper false after picking into the countermilling trap and then setting the sidebar? I found this to be the case, and was wondering about your experience.
Re: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Thu Jul 13, 2017 12:36 amtumbl3r wrote:That's some wonderful picking, Chris! You really do have the gift man!
When you picked your Twin 6000s with Gin-Bottle spools did you find that the spools bottomed out only after you set the sidebar? Which is to say, did you fall into a deeper false after picking into the countermilling trap and then setting the sidebar? I found this to be the case, and was wondering about your experience.
Yes it would go into a deeper false set that was virtually impossible to get out. I would try not to fully set the side bar just one pin from setting then set the drivers that kept them from going fully in the counter milling
Re: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Thu Jul 13, 2017 5:21 pmI have only picked one, but it actually alternated between the top pins and sidebar binding.
So I'd poke the top pins until the sidebar bound, pick 1-2 side pins and there's nothing more binding, pick more top pins, etc.
This seems to be the exception rather than the rule for these? Maybe this is how they are intended to act but they never got the tolerances down to get them to behave like this consistently.
The top pins were never impossible to get out of a false set by the way, but the feedback was really poor.
So I'd poke the top pins until the sidebar bound, pick 1-2 side pins and there's nothing more binding, pick more top pins, etc.
This seems to be the exception rather than the rule for these? Maybe this is how they are intended to act but they never got the tolerances down to get them to behave like this consistently.
The top pins were never impossible to get out of a false set by the way, but the feedback was really poor.
Re: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Sun Jul 16, 2017 12:52 pmPatrick Star wrote:I have only picked one, but it actually alternated between the top pins and sidebar binding.
So I'd poke the top pins until the sidebar bound, pick 1-2 side pins and there's nothing more binding, pick more top pins, etc.
This seems to be the exception rather than the rule for these? Maybe this is how they are intended to act but they never got the tolerances down to get them to behave like this consistently.
The top pins were never impossible to get out of a false set by the way, but the feedback was really poor.
Once the top pins got into the false set it wasn't to bad like you said lack of feedback, but if I didn't get that false set I would get nothing at all. Thanks for watching and your comment I appreciate it
Re: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Fri Aug 04, 2017 8:45 pmRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Fri Aug 18, 2017 2:05 pmRe: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Mon Aug 28, 2017 11:28 amC-C-C-COMBI BREAKER
Re: Chris Ahrens Lockpicking heavens gate YouTube channel
Posted: Tue Aug 29, 2017 1:09 pmhttps://youtu.be/skA0Xgl7IXA
Supallama Schlage primus challenge lock
Supallama Schlage primus challenge lock