FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

SouthOrd MPXS-62 Zipper Case

<<

xeo

User avatar

Catministrator
Catministrator

Posts: 2180

Joined: Mon Jul 19, 2010 9:30 pm

Post Fri Sep 03, 2010 8:57 pm

SouthOrd MPXS-62 Zipper Case

Grabbed this case from Lockpickshop.com. I must say... it is an extremely well made case. All of the areas in this case that would experience the most stress are reinforced with stitching. The leather is far from cheap and uses a YKK zipper (the industry leader). The outside is textured for holding a firm grip. I was particularly surprised at how tight the pockets are. It was a bit difficult sliding my tools into these virgin-tight pockets. I would recommend loading up your case and leaving it zippered for 24 hours so the pockets have time to break in. Other than that... I'm extremely pleased. I can hold a ton of stuff in here although I choose to stay as minimalistic as possible. I can even fit my dimple picks!

I highly recommend this.
You do not have the required permissions to view the files attached to this post.
Last edited by xeo on Sat Sep 04, 2010 8:38 pm, edited 1 time in total.
Image
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1

(ノಠ益ಠ)ノ彡┻━┻

░░░░░░░░░░░░░Image
<<

KokomoLock

User avatar

Professor Emeritus Of Lockpickology and Smithery

Posts: 1107

Joined: Thu May 14, 2009 1:23 pm

Location: Indiana

Post Fri Sep 03, 2010 9:00 pm

Re: SouthOrd MPSX-62 Zipper Case

Very nice case! Do you have any problems pulling out the picks? On my Peterson tri fold case I have issues getting some picks out of their spots.
<<

xeo

User avatar

Catministrator
Catministrator

Posts: 2180

Joined: Mon Jul 19, 2010 9:30 pm

Post Fri Sep 03, 2010 9:01 pm

Re: SouthOrd MPSX-62 Zipper Case

I've left it zippered/loaded for about 48 hours and now they silde out very easily.
Image
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1

(ノಠ益ಠ)ノ彡┻━┻

░░░░░░░░░░░░░Image
<<

edsmiley

User avatar

Contributor - Research & Development Kingpin
Contributor - Research & Development Kingpin

Posts: 322

Joined: Sun Aug 15, 2010 6:08 pm

Location: Pennsylvania

Post Fri Sep 03, 2010 9:03 pm

Re: SouthOrd MPSX-62 Zipper Case

Nice looking case Xe0!

Here is a link for anything interested: http://www.lockpickshop.com/MPXS-62C.html

Ed
Image
<<

the lockpickkid

User avatar

I've Been Banned!!
I've Been Banned!!

Posts: 1983

Joined: Wed May 07, 2008 2:28 pm

Location: Oregon

Post Sat Sep 04, 2010 1:09 am

Re: SouthOrd MPSX-62 Zipper Case

I am looking for a Peterson case, I need a big one, the Petersons I bought came with a snap over case that is way too small to start with and I need to add some other stuff to carry and I need more room. Anybody need a Peterson snap over case, let me know.
I have been in the souls of many women, but I always end up on the soles of there shoes.
<<

s1deshowmick

User avatar

Contributor
Contributor

Posts: 634

Joined: Fri Aug 08, 2008 5:31 am

Location: Western Australia

Post Sat Sep 04, 2010 3:24 am

Re: SouthOrd MPSX-62 Zipper Case

Very handy case, it looks alot like one i got from LPT.com ages ago.

I had a bit of trouble with my petersons cases to, they are as tight as a frogs bum new, but they do break in nice after a while.
If you can't be good, Be good at it.

http://au.youtube.com/S1DESHOWMICK
<<

KokomoLock

User avatar

Professor Emeritus Of Lockpickology and Smithery

Posts: 1107

Joined: Thu May 14, 2009 1:23 pm

Location: Indiana

Post Sat Sep 04, 2010 5:14 pm

Re: SouthOrd MPSX-62 Zipper Case

I have tried lockpickshop and southords web site and no one give the dimensions on the case. Xe0, when you get time could you post some dimensions please, thanks.
<<

xeo

User avatar

Catministrator
Catministrator

Posts: 2180

Joined: Mon Jul 19, 2010 9:30 pm

Post Sat Sep 04, 2010 8:36 pm

Re: SouthOrd MPSX-62 Zipper Case

KokomoLock wrote:I have tried lockpickshop and southords web site and no one give the dimensions on the case. Xe0, when you get time could you post some dimensions please, thanks.


Zippered:

5.5 inches length
3.5 inches width
.75 inches height

Opened:

5.5 inches tall
~7.5 inches wide
Image
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1

(ノಠ益ಠ)ノ彡┻━┻

░░░░░░░░░░░░░Image
<<

WhitePicker

I've Been Banned!!
I've Been Banned!!

Posts: 119

Joined: Thu Aug 26, 2010 3:59 am

Location: Belguim!

Post Mon Sep 06, 2010 11:45 pm

Re: SouthOrd MPXS-62 Zipper Case

Nice large pouch :)
only its 40 Dollar
not that expensive but for a pouch it is ...
i also orderd a new pouch from Lockpicktools.com
they dont got it on there website but i made a e-mail for them and ya get a pouch for 13-14 dollar
Photo : http://lockpicktools.com/images/propack65-600.jpg (ofcourse without the picks etc)

Dont see much diffrence's
and i think these are equal of lengths etc :o
i can answer these if i got it possible tomorow

Return to Product Reviews

Who is online

Users browsing this forum: No registered users

cron
Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware