.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Nov 04, 2008 10:02 pm**

I've been picking locks for about 3 months. I have never had to bad of a problem opening a lock till a got this fortress. Single pin picking is what i'm doing till i get a set from some where and so far i haven't found one that couldn't be picked with a hair pin and don't want to find one now. So please help

Posted: **Tue Nov 04, 2008 10:27 pm**

I've picked a Fortress 40mm before, and for me, the key was taking it slow. Since it's a bit of a step up from the norm for me, I had to take my time and learn the feel. I know it might not help you specifically, but the one I picked felt different. It's hard to explain, but just take it slow and try all of the pins until you find the first one that binds. After that it's cake.

Posted: **Wed Nov 05, 2008 4:45 pm**

here's how its done...hope this helps a bit..

http://www.youtube.com/watch?v=4zVRL710SXc

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

fortress brass 40 mm help

fortress brass 40 mm help

Re: fortress brass 40 mm help

Re: fortress brass 40 mm help