.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Fri Jan 14, 2011 4:40 pm**

Well i fecked it up. Pin 1 was cut too deep but i think i got bloody close on the others. Oh well i'll keep trying till i get it. :wgaf:

Image104.jpg

Posted: **Sat Jan 15, 2011 10:33 am**

When you file the marks, there is a point when you stop seeing a mark. Stop filing that cut, because you will see a mark when you file too deep as well. The reason is the pin is binding when too shallow and when too deep. Hope that helps.

Posted: **Sun Jan 16, 2011 2:33 pm**

jailersmith wrote:When you file the marks, there is a point when you stop seeing a mark. Stop filing that cut, because you will see a mark when you file too deep as well. The reason is the pin is binding when too shallow and when too deep. Hope that helps.

Thanks bud i'll bear that in mind on my next attempt.

Posted: **Tue Jan 18, 2011 7:17 am**

Doesnt look to bad for a 1st attempt - practice practice practice = makes perfect - hope you have better luck next time Bouncer

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

My first pin tumbler impressioning attempt

My first pin tumbler impressioning attempt

Re: My first pin tumbler impressioning attempt

Re: My first pin tumbler impressioning attempt

Re: My first pin tumbler impressioning attempt