Page 1 of 1

Abloy padlocks

PostPosted: Sun Mar 24, 2019 7:00 am
by Janp
I bought a lot of 5 old abloy padlocks. I would like to make a cut away. Is there anyone who has done this with an Abloy? Any tips were to cut/ mill?
Help is welcome and better are pictures!

Re: Abloy padlocks

PostPosted: Wed Mar 27, 2019 1:40 pm
by Jaakko Fagerlund
Quick answer: Pretty much very difficult as you can't disassembe those relicks.

Long answer: sacrifice one.

Re: Abloy padlocks

PostPosted: Thu Mar 28, 2019 8:40 am
by Janp
Thanks Jaakko!
I have bought 4 more. So I have 9 at home. I’ll put one under the mill.
Thanks.

Re: Abloy padlocks

PostPosted: Thu Mar 28, 2019 10:55 pm
by Jaakko Fagerlund
Just out of interest, in which country you find these in those quantities? Those are not very common here, only seen a handful.

Re: Abloy padlocks

PostPosted: Fri Mar 29, 2019 11:22 am
by Janp
I bought them in te Netherlands but there is a change they came from Belgium. The seller told me that her father bought them in Belgium she tought.....

Re: Abloy padlocks

PostPosted: Thu Jun 20, 2019 9:55 am
by Janp
I Have started with one abloy. So far so good! Here some pictures.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

I think I make the cut away bigger.

Re: Abloy padlocks

PostPosted: Thu Jun 20, 2019 10:01 am
by Janp
Last ones with the cut away....

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 5:00 am
by Visitor
They can be disassembled just like everything that's been made by humans can be. I personally don't know exactly how to disassemble these models but there will more likely be one or more hidden pins you'll need to drill out.

If you're machining them assembled you'll have to finish by hand so you don't destroy the discs.

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 8:10 am
by Squelchtone
Visitor wrote:They can be disassembled just like everything that's been made by humans can be. I personally don't know exactly how to disassemble these models but there will more likely be one or more hidden pins you'll need to drill out.

If you're machining them assembled you'll have to finish by hand so you don't destroy the discs.


Did you miss all of OPs photos of the lock taken apart ? click here to see the lock taken apart: viewtopic.php?f=132&t=12839&p=118754#p118728

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 11:35 am
by Riyame
Squelchtone wrote:
Visitor wrote:They can be disassembled just like everything that's been made by humans can be. I personally don't know exactly how to disassemble these models but there will more likely be one or more hidden pins you'll need to drill out.

If you're machining them assembled you'll have to finish by hand so you don't destroy the discs.


Did you miss all of OPs photos of the lock taken apart ? click here to see the lock taken apart: viewtopic.php?f=132&t=12839&p=118754#p118728



Those aren't loading for me, I guess they aren'y for Visitor either.

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 12:25 pm
by Squelchtone
Riyame wrote:
Squelchtone wrote:
Visitor wrote:They can be disassembled just like everything that's been made by humans can be. I personally don't know exactly how to disassemble these models but there will more likely be one or more hidden pins you'll need to drill out.

If you're machining them assembled you'll have to finish by hand so you don't destroy the discs.


Did you miss all of OPs photos of the lock taken apart ? click here to see the lock taken apart: viewtopic.php?f=132&t=12839&p=118754#p118728



Those aren't loading for me, I guess they aren'y for Visitor either.



hmm, here is a direct link: https://messenfotos.ml/3dgitgg9lxgf.jpg

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 2:27 pm
by Riyame
Squelchtone wrote:
Riyame wrote:
Squelchtone wrote:
Visitor wrote:They can be disassembled just like everything that's been made by humans can be. I personally don't know exactly how to disassemble these models but there will more likely be one or more hidden pins you'll need to drill out.

If you're machining them assembled you'll have to finish by hand so you don't destroy the discs.


Did you miss all of OPs photos of the lock taken apart ? click here to see the lock taken apart: http://www.keypicking.com/viewtopic.php ... 54#p118728



Those aren't loading for me, I guess they aren'y for Visitor either.



hmm, here is a direct link: https://messenfotos.ml/3dgitgg9lxgf.jpg


Just times out after loading for a minute or 2.. I tried it a few times.

Re: Abloy padlocks

PostPosted: Tue Jun 25, 2019 3:27 pm
by MartinHewitt
I don't have a problem at all with the link. The image loads quickly and it does not require any javascript.

Re: Abloy padlocks

PostPosted: Wed Jun 26, 2019 5:01 am
by Visitor
No it doesnt load for me either, glad it got disassembled as I said everything can be.

Re: Abloy padlocks

PostPosted: Wed Jun 26, 2019 11:25 am
by gnarus8429
Nice photos of the disassembly that you went through.