Silca Matrix
Posted: Thu Dec 26, 2019 11:48 pm
Hey guys - some time back, I purchased a used Silca Matrix key duplicator off of Craigs List. It is currently set up to cut Honda "laser" type keys either by duplication or by code. I mainly want to use it to play with some dimple key stuff, or for keyway modification to fit more common blanks to obscure specimens...
Does anyone have access to Silca's supply chain to order the tooling and tracers? I spent a few hours tonight looking around the internet and it seems very difficult to find. I know Ilco is the US brand fronting Silca, but their documentation is sketchy at best and the usual suspects (CLK etc) are coming up short.
The machine requires 6mm tooling, and I am looking for a v-bit, chamfer or countersink type bit greater than 90 degrees. Seems metric tool is very hard to come by in any way that is meaningfully searchable. I'd prefer to stick with OEM Silca, but if anyone has any tips for obtaining metric tooling I'd be all ears.
Thanks folks!
Does anyone have access to Silca's supply chain to order the tooling and tracers? I spent a few hours tonight looking around the internet and it seems very difficult to find. I know Ilco is the US brand fronting Silca, but their documentation is sketchy at best and the usual suspects (CLK etc) are coming up short.
The machine requires 6mm tooling, and I am looking for a v-bit, chamfer or countersink type bit greater than 90 degrees. Seems metric tool is very hard to come by in any way that is meaningfully searchable. I'd prefer to stick with OEM Silca, but if anyone has any tips for obtaining metric tooling I'd be all ears.
Thanks folks!