.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

can not be bumped.
can not be easily drilled,at least 3 hours.
only dynamite or acid could do the job.
perhaps im the only specialist left. Total outrageous claims on the bay.
see pic.

This is a euro spec mp 10 and mp 15.

That is a cool looking lock.

Its mine won it today,£1.04.
The guy put it on no reserve,and was talking about £70.00.keep checking my messages,hope he doesn,t come up with some lame excuse for not sending it.
i payed for it the minute,i won it.
ill be pissed as i really want to pick it bad.

Good luck with that mate. It's legally yours but I sold summat the other day for £550 (a good £300 short of what I wanted for it) but I had to legally stick with it and sell it for £550. However, the guy decided he didn't want it afterwards and has since disappeared. So now I owe Ebay £50 for the privelege of not selling it! So though it can work both ways there are some shitty dealers on Ebay all right...

Thats bad hp, the thing his id have happly gone up to £20.00,but no one else bidded, im going to keep my fingers crossed on this one.

looks like hes sent it,comes up as sent. great stuff.

It came today,it was worth the wait,but put up a real battle. open

Now that is a great result in price and picking

Is it like the EVVA DPS? With normal pins on the top and a dimple-like sidebar on the side? I think the DPS is like that anyways.

These are all evva,one on the left as no side bar,the other two have,and they all have different keyways.The mp10 as no side bar like the evva dps,it as side blocking pins. click on pics to enlarge them.

Ok, so the side blocking pins don't do anything till you turn the plug and without a key they'll pop into the keyway? Like trap pins?

I get full rotation so they dont get trapped at all,the 4 side blocking pins are in there to mess with normal picking,and the 6 pins are almost v shaped so your pick keeps sliding off the pin. without taking it apart i dont know what antipick pins are in it.

Oh, right, so we're talking about passive blocking pins? Gotcha now!

the DPS I just did last week gets trapped at the 7 oclock position
but with a bit of pick wriggling will go all the way round