Page 4 of 44

Re: Happy 2020!

PostPosted: Sun Jan 19, 2020 10:49 am
by edocdab
As I didn't get a chance to make or modify a pick, I ordered a commercial thin shaft large HD. It seems similar to yours, but the diamond is 0.5mm higher in my case and less steep. I am experimenting now to see how I find it. So far, I like it!

Re: Happy 2020!

PostPosted: Sun Jan 19, 2020 3:31 pm
by femurat
Don't get too worried about the pick dimensions. Everyone has his own preferences, many different picks can work fine with the same lock. Just practice and you'll be fine.

Image

Day 19 of 366. This was my very first cylinder!

Cheers :)

Re: Happy 2020!

PostPosted: Sun Jan 19, 2020 3:43 pm
by MHM
Hard to tell from the angle of the photo* but it looks like the horrible Tesa keyway that has the sides that slope together towards the top...and if so I'm guessing it's an unbranded TE5.

*Your photos are stunning btw, dunno what camera or phone you're using but it's epic.

Re: Happy 2020!

PostPosted: Sun Jan 19, 2020 3:52 pm
by just1pick+open
Keep up the great work. That pick is going to get a work out. :D

Re: Happy 2020!

PostPosted: Mon Jan 20, 2020 8:03 am
by edocdab
Femurat, yep. I am practicing and learning. MHM, I fully agree the photos are great

Re: Happy 2020!

PostPosted: Mon Jan 20, 2020 8:38 am
by femurat
MHM wrote:Hard to tell from the angle of the photo* but it looks like the horrible Tesa keyway that has the sides that slope together towards the top...and if so I'm guessing it's an unbranded TE5.

*Your photos are stunning btw, dunno what camera or phone you're using but it's epic.


Yes, that's an unbranded Tesa. Luckily for me it's master-keyed, otherwise I would have quit this hobby pretty quick.

Thank you! I take the pictures with my samsung galaxy s. Now I have the s9 and soon will have the s10. I started with the first one some years ago and had many of that series. All of them have always been great to take pictures.
To photograph locks this year I started using a trick: a samla box lid between the lamp and the lock to diffuse the light. Then I hold the phone still, then I touch the screen to focus on the lock. Easy!

just1pick+open wrote:Keep up the great work. That pick is going to get a work out. :D


Sure, it will... :mrgreen:

Cheers :)

Re: Happy 2020!

PostPosted: Mon Jan 20, 2020 3:00 pm
by femurat
Image

Day 20 of 366.

Cheers :)

Re: Happy 2020!

PostPosted: Tue Jan 21, 2020 2:52 pm
by femurat
Image

Day 21 of 366.

Cheers :)

Re: Happy 2020!

PostPosted: Tue Jan 21, 2020 3:22 pm
by edocdab
And that marks 3 weeks 8-) Congratulations!

Re: Happy 2020!

PostPosted: Wed Jan 22, 2020 2:46 pm
by femurat
Thanks!

Image

Day 22 of 366.

Cheers :)

Re: Happy 2020!

PostPosted: Thu Jan 23, 2020 12:47 pm
by femurat
Image

Day 23 of 366. This WINKHAUS was not an easy pick.

Cheers :)

Re: Happy 2020!

PostPosted: Thu Jan 23, 2020 2:43 pm
by edocdab
You managed though. The bitting looks serious too. You were able to pick it completely with this hd?

Re: Happy 2020!

PostPosted: Fri Jan 24, 2020 2:43 pm
by femurat
Sure. I always put all the tools I use in the picture.

Image

Day 24 of 366. An old Vachette padlock with an unusual shape.

Cheers :)

Re: Happy 2020!

PostPosted: Fri Jan 24, 2020 3:14 pm
by edocdab
Nice lock :) I'm both curious and trying to get better myself, so thanks for your info every time. My skills and understanding increase bit by bit like this.

Re: Happy 2020!

PostPosted: Sat Jan 25, 2020 10:00 am
by femurat
You're welcome!

Image

Day 25 of 366. Today I tried to pick a medeco but failed. So I went back to my comfort zone.

Cheers :)