FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Proper Dremel bits for pick making?

<<

pgribe

Newbie

Posts: 1

Joined: Tue Sep 15, 2020 10:23 am

Post Fri Jul 16, 2021 10:43 pm

Proper Dremel bits for pick making?

Hello!

I recently got a dremel 3000 rotary tool and the first thing I thought of was making lockpicks. I'm tired of hand filing hacksaw blades. But I don't know a lot about metalworking or power tools, and the amount of bits available for dremel tools nears infinity. I guess I should use cutting disks to get the stocks down to size and then the pink aluminum oxide grinding stones to get the pick shape, but I'm not entirely sure if I should stop there or if I can use other bit to finish the piece, rounding edges and polishing, etc.

Most of the information I could find was about using bench grinders or sand belts for pick making, not a lot of information on rotary tools.

Thanks! Also let me know if this is the wrong section, I thought about posting this on the DIY but most of the stuff there was so specific, I found this to be more of a beginner question.
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3754

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Sat Jul 17, 2021 4:14 am

Re: Proper Dremel bits for pick making?

I don't use dremel tools to make picks. It is very overheat the metal and ruin the temper. I have used a bench grinder to do the rough grinding, but I keep dipping the metal in water every few seconds to keep the metal cool enough to prevent ruining the temper.

I don't know how to cool the metal while using a dremel.

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

tpark

Contributor
Contributor

Posts: 241

Joined: Fri Nov 13, 2015 10:17 pm

Location: Alberta, Canada

Post Sat Jul 17, 2021 3:55 pm

Re: Proper Dremel bits for pick making?

I do pretty much the same thing as Gordon. I get the shape close to what I want on the bench grinder, then use a hand file to finish the shape. I have used my dremel tool for shaping as well, but I only removed small amounts of material at a time so the work part didn't overheat. For stock I use Starrett or Precision feeler gauge. I've gotten lazy and I mostly buy Peterson or Multipick tools, these work well for regular locks, but sometimes I need special tools for Primus or Assa locks.

I find that hacksaw blade is too brittle for me, 16 or 20 thou Starrett is what works for me.

slidertools.jpg
You do not have the required permissions to view the files attached to this post.
<<

mastersmith

User avatar

Contributor
Contributor

Posts: 624

Joined: Wed May 25, 2011 10:16 pm

Location: Miami Township, Ohio

Post Wed Jul 21, 2021 7:58 pm

Re: Proper Dremel bits for pick making?

Over heating will be an issue no matter what type of powered tool you use. Modern Dremel tools are variable speed and can there for be regulated as to how much heat they produce. The cutting/grinding wheels though are designed for certain speeds. Going out of range may reduce their efficiency. I use a Dremel for very delicate work, like making the small "humps" in a rake. Just be careful, keep water close (in case) and craft away!
"All ye who come this art to see / to handle anything must cautious be...." Benjamin Franklin

Return to Uber-Noob

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware