FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Master LOTO core in a Master 6230 padlock?

<<

Blazer0981

Newbie

Posts: 5

Joined: Tue Aug 06, 2019 4:18 pm

Location: Shreveport, LA

Post Wed Sep 18, 2019 12:42 am

Master LOTO core in a Master 6230 padlock?

I've got an Abus 72/40 LOTO padlock and a round body Master Pro series here that use the same basic core with the only difference being the orientation of the actuator thing on the back. One is horizontal and one is vertical.

Is it possible to get that Abus core to work with the Master padlock? Can I change the orientation of the receiver piece in the lock itself so it will accept the other core?


Thanks.
Last edited by Blazer0981 on Wed Oct 02, 2019 10:06 pm, edited 1 time in total.
<<

Blazer0981

Newbie

Posts: 5

Joined: Tue Aug 06, 2019 4:18 pm

Location: Shreveport, LA

Post Wed Oct 02, 2019 9:38 pm

Re: Abus core in a Master padlock?

So it won't work. An 1100 series core won't work in a Master 6230. The tailpiece and actuator don't match. One is vertical and one is horizontal.


However, it appears that the core from Master's 410 LOTO locks will work. I've yet to bust open my LOTO to check, but both use the same orientation of the actuator. One is just a little bit bigger than the other. Not as much material was machined away.

Anybody tried this? Thanks.

Return to Uber-Noob

Who is online

Users browsing this forum: CommonCrawl [Bot], Google [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware