Cant get my pick gun to work
Posted: Fri Sep 22, 2017 4:10 ami bought a pick gun, tried it on my front door and my other house doors but doesnt seem to work? Any ideas why?
.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!
A Discussion Forum For Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, Lockpicks, cutaways, and security. Simply The Best Lockpicking Forum Around!
https://keypicking.com/
Cant get my pick gun to work
Page 1 of 1
Posted: Fri Sep 22, 2017 4:10 amRe: Cant get my pick gun to work
Posted: Fri Sep 22, 2017 4:37 amPerhaps you are not using it correctly. I would also suggest not using it on locks in use because it is inevitable that you will break one.
Re: Cant get my pick gun to work
Posted: Fri Sep 22, 2017 4:52 ami bought a padlock, but how do i use it correctly?
Re: Cant get my pick gun to work
Posted: Fri Sep 22, 2017 7:56 amMay need a Bigger Caliber! 
Just kidding, how about a photo of your pick gun and lock?
Is it a warded padlock?
Just kidding, how about a photo of your pick gun and lock?
Is it a warded padlock?
Re: Cant get my pick gun to work
Posted: Fri Sep 22, 2017 10:15 amFor some people pick guns require a lot of practice to get them to work.
There are videos and posts out there that do show how they work.
Many people have wrecked locks using them the wrong way.
There are videos and posts out there that do show how they work.
Many people have wrecked locks using them the wrong way.
Re: Cant get my pick gun to work
Posted: Fri Sep 22, 2017 2:35 pmIt's super important to have the needle level with the pins, and when it snaps, it's shouldn't be pushing the pins up, only snapping against the bottom of the pins. Search on youtube, there are a bunch of videos on this.
My experience has been that pick guns work OK on standard locks, but if there are security pins in there it's much harder.
My experience has been that pick guns work OK on standard locks, but if there are security pins in there it's much harder.
Re: Cant get my pick gun to work
Posted: Sat Sep 23, 2017 8:31 amits a cqc padlock, would it work?
Re: Cant get my pick gun to work
Posted: Tue Sep 26, 2017 7:23 amFrom the videos I've seen, CQC padlocks are disk detainer locks, so a pick gun is not the correct tool for this lock.