Sun Dec 28, 2014 8:45 am
STABILITY padlock
Hi Guys,
I picked up this STABILITY padlock without a key a few weeks ago.
After doing some googling I learned that I should be able to bypass it and it worked!
But what I really wanted to do was impression a key for it.
So, after rummaging through my junk drawer I found a strip of titanium of suitable thickness and a plastic washer.
20 minutes later I had one of the uglier keys I have seen but also a fairly unique key.
The titanium holds up very well!
For the impressioning I used the candle method.
All in all a fun way to kill some time in the shop!
I picked up this STABILITY padlock without a key a few weeks ago.
After doing some googling I learned that I should be able to bypass it and it worked!
But what I really wanted to do was impression a key for it.
So, after rummaging through my junk drawer I found a strip of titanium of suitable thickness and a plastic washer.
20 minutes later I had one of the uglier keys I have seen but also a fairly unique key.
The titanium holds up very well!
For the impressioning I used the candle method.
All in all a fun way to kill some time in the shop!
You do not have the required permissions to view the files attached to this post.
Do nothing which is of no use. -Miyamoto Musashi