Need key bitting for an American double sided wafer padlock
Posted:
Fri Sep 13, 2013 5:35 pm
by GWiens2001
Just received an old American padlock, round, double sided wafer lock. Key code stamped on the lock is H220776. Can somebody please PM me the bitting!
Thanks,
Gordon
Re: Need key bitting for an American double sided wafer padl
Posted:
Fri Sep 13, 2013 6:10 pm
by keymaster1053
Gordon, if nobody can find that code, I have a set of try out keys for those Chicago locks. if you send me the lock, I'll find the right one for you.
Jim
Re: Need key bitting for an American double sided wafer padl
Posted:
Fri Sep 13, 2013 6:30 pm
by GWiens2001
I appreciate it, but at that time American had their own blanks. The Chicago lock blanks were thicker, as I recall. May take you up on it if all else fails.
These were made by Juncunc Bros
Gordon
Re: Need key bitting for an American double sided wafer padl
Posted:
Fri Sep 13, 2013 11:50 pm
by DR2
I had a few of them that were basket-cases with really mangled cores and I obtained a classic American kit to service them. They are quite a PITA to work on as well! But, they are tough and they are really beautiful locks, as your's is. Good luck with it.