FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Need key bitting for an American double sided wafer padlock

<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3795

Joined: Thu Oct 25, 2012 9:05 pm

Location: Arizona, United States

Post Fri Sep 13, 2013 5:35 pm

Need key bitting for an American double sided wafer padlock

Just received an old American padlock, round, double sided wafer lock. Key code stamped on the lock is H220776. Can somebody please PM me the bitting!

Thanks,

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3795

Joined: Thu Oct 25, 2012 9:05 pm

Location: Arizona, United States

Post Fri Sep 13, 2013 5:43 pm

Re: Need key bitting for an American double sided wafer padl

Image

Image

Image

Image

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

keymaster1053

Active Member

Posts: 433

Joined: Thu Dec 29, 2011 6:45 pm

Location: Boston, Mass.

Post Fri Sep 13, 2013 6:10 pm

Re: Need key bitting for an American double sided wafer padl

Gordon, if nobody can find that code, I have a set of try out keys for those Chicago locks. if you send me the lock, I'll find the right one for you. :)
Jim
(20:10:59) Blacky: oki
(20:18:08) MBI: Me working for the CIA is about as likely as you working in the Middle East.
(20:19:01) Riyame: lol
(20:19:05) Riyame: he is in dubai
(20:19:26) MBI rescinds his previous comment
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3795

Joined: Thu Oct 25, 2012 9:05 pm

Location: Arizona, United States

Post Fri Sep 13, 2013 6:30 pm

Re: Need key bitting for an American double sided wafer padl

I appreciate it, but at that time American had their own blanks. The Chicago lock blanks were thicker, as I recall. May take you up on it if all else fails.

These were made by Juncunc Bros

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

DR2

User avatar

Familiar Face

Posts: 93

Joined: Wed Jul 31, 2013 3:09 pm

Location: East Coast

Post Fri Sep 13, 2013 11:50 pm

Re: Need key bitting for an American double sided wafer padl

I had a few of them that were basket-cases with really mangled cores and I obtained a classic American kit to service them. They are quite a PITA to work on as well! But, they are tough and they are really beautiful locks, as your's is. Good luck with it. 8-)
"Any sufficiently advanced technology is indistinguishable from magic." ~ Arthur C. Clarke's Third Law of Prediction

Return to HELP!!!!!

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware