FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Lagard Smartgard v.5.0 6260 002D-00 (hi-sec electronic lock)

<<

entropy

Familiar Face

Posts: 61

Joined: Mon Jan 24, 2011 3:32 am

Location: Portland, OR

Post Sun Jul 26, 2020 12:58 am

Re: Lagard Smartgard v.5.0 6260 002D-00 (hi-sec electronic l

If your clips are too small to hook to the eeprom you can solder some small wires to it and run those to larger pin headers. Assuming your soldering iron is small enough to work on a part that size.
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1500

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Sun Jul 26, 2020 8:21 am

Re: Lagard Smartgard v.5.0 6260 002D-00 (hi-sec electronic l

Information about the reset box: viewtopic.php?f=100&t=13210
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

danielpfmarinho

Newbie

Posts: 10

Joined: Wed Dec 18, 2019 1:05 pm

Location: Fortaleza, Ceara, Brazil

Post Mon Jul 27, 2020 5:04 pm

Re: Lagard Smartgard v.5.0 6260 002D-00 (hi-sec electronic l

Actually I had built the reset box (viewtopic.php?f=100&t=13210) and tried on it just before your post. I'll make a video to show. I have two of these locks, so I only tried the reset box on one of them and... it doesn't accept any code, some seconds after inserting any code it shows "error 256 serial", i think I have screwed it up...

The second lock, don't ask me how, only trying some codes, I got to change the master code and access master menu, but I also need to have at least the manager code to add an user to set a code to finally open the lock. I will also make a video showing this.
<<

danielpfmarinho

Newbie

Posts: 10

Joined: Wed Dec 18, 2019 1:05 pm

Location: Fortaleza, Ceara, Brazil

Post Mon Jul 27, 2020 11:59 pm

Re: Lagard Smartgard v.5.0 6260 002D-00 (hi-sec electronic l

I've found a reset software, but I need the interface cable (ref: 2034), does anyone know the pinage to link the "four way" connector of the lock onto a usb? actually the cable is serial, but, knowing the pinage, make an usb version don't seems to be a problem.
Previous

Return to Safes, Strongboxes & Combination Locks

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware