FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Chubb combination lock fail

<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1823

Joined: Sat Nov 26, 2016 12:19 pm

Location: Germany

Post Sun Mar 26, 2017 1:08 pm

Re: Chubb combination lock fail

My Kromer 3011 has similar solid wheels. I took mine with me in the car for a few days to see if the wheels move. I believe they did. Luckily most safes are not in cars or on ships. I believe these big locks are made primarily for reliability.
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Sun Mar 26, 2017 2:04 pm

Re: Chubb combination lock fail

I will stick it in the van this week ( average around 400 miles per week) with all gates down, and see how it looks after 1 week.

Image

I believe a vibrating poker as used to get bubbles out of concrete as its being poured was the vibrating bypass. Im not in the trade just now so cant test the poker, but have a customer who has.
<<

femurat

User avatar

Prolific Poster

Posts: 1451

Joined: Mon Mar 14, 2011 3:47 pm

Location: Italy

Post Mon Mar 27, 2017 6:32 am

Re: Chubb combination lock fail

MartinHewitt wrote:
femurat wrote:I use graph paper, and draw the scale so that every number has its own line.

If you make a scan, which numbers to you graph? Every second? Also every second and a half?

Martin Hewitt


I scan every other number. If I read every two numbers and a half I save time but I may miss a good indication. Never underestimate a lock ;-)

Congrats for the opening and for the new Chubb, ratlock.
I'm confused by your graphs. (EDIT: I'm talking about the new ones on blue graph paper.) It may be because I'm a little tired, or I may be right.
A graph should represent the area between contact points. Our goal is to reduce that area. This is why I would put the 4 up and the 96 on the bottom.
Imagine the scale from the bottom of your graph going like 96, 97, 98 ...some empty space... 3, 4, 5.
It's like if you had a scale that starts from zero on the bottom and goes up until 100, and then goes on again. You only take the part that you need.
Hope this makes sense and help you.

Cheers :)
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Mon Mar 27, 2017 11:30 am

Re: Chubb combination lock fail

Cheers Femurat. I relised the number mistake after I had drawn my first graph, but thought to keep it the same for the second one, I was starting to confuse myself, by then.
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Tue Mar 28, 2017 10:44 am

Re: Chubb combination lock fail

Heres the next lock I think I will mount up and have a play with. Its an oldie and worth saving. Bode Panzer.

Image

Image
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Tue Mar 28, 2017 1:39 pm

Re: Chubb combination lock fail

If any one has a spare wheel for this one (the Panzer lock) Id be happy to buy it, or trade for it. It turns out im a wheel short. Great Ebay buy at the time.

Image
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Tue Mar 28, 2017 1:48 pm

Re: Chubb combination lock fail

Heres another bargain off ebay, its a cool lock, and looks good mounted up. But what a racket the clicker inside makes.

It has another wheel behind the cam wheel (closest to the dial). In this second wheel there is a groove roughly the same size as the drop in point.
There is a spring loaded ball bearing, that clicks into the slot and makes a loud "clacking" noise. Ohh boy what a row.

Has anybody removed the grub screw that holds the spring in place.? This one has glue or thread lock on it, and is pretty solid.

Nice lock, but would wake the kids If I played with it in the house.
Image
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1823

Joined: Sat Nov 26, 2016 12:19 pm

Location: Germany

Post Tue Mar 28, 2017 2:15 pm

Re: Chubb combination lock fail

Could you please show us a photo of the inside?
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

mercurial

Familiar Face

Posts: 205

Joined: Fri Jan 31, 2014 5:11 pm

Location: Australia

Post Tue Mar 28, 2017 8:37 pm

Re: Chubb combination lock fail

MartinHewitt wrote:Could you please show us a photo of the inside?


That would be a Mosler MR 302/402. (302 has 3 wheels, 402 has 4 wheels).

Oldfast has done a great breakdown of one here : https://www.keypicking.com/viewtopic.php?f=100&t=8411

...Mark
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Wed Mar 29, 2017 12:41 am

Re: Chubb combination lock fail

Yep thats the lock covered there in oldfasts thread. Sorry I cant show you the spline key in my lock for comparison, as I had to make one, (normal "L" shape) But agree that without the proper one, in time it will work loose, as there is a load of vibration caused by the clacker.
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Fri Mar 31, 2017 10:25 am

Re: Chubb combination lock fail

Here is a follow up on the 4 wheel chubb lock, where I put it in the van for 1 week with all the wheels at the 6 o clock position. (see previous picture)

After 5 days of my driving around Aberdeenshire in the van, the wheels have all moved anti clockwise to roughly the 3 o clock position.

Image
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1823

Joined: Sat Nov 26, 2016 12:19 pm

Location: Germany

Post Fri Mar 31, 2017 11:01 am

Re: Chubb combination lock fail

Not really good, but at least it does not open without human help.
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Tue Apr 18, 2017 3:08 pm

Re: Chubb combination lock fail

Heres that last lock finally mounted up on 10mm plate. Its a big lock to mount up.

Image

Image
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1823

Joined: Sat Nov 26, 2016 12:19 pm

Location: Germany

Post Tue Apr 18, 2017 4:42 pm

Re: Chubb combination lock fail

So now you can drill to open the lock?

With such a mounting the spindle doesn't have to be shortened.
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

ratlock

User avatar

Familiar Face

Posts: 208

Joined: Sat May 07, 2016 2:41 am

Location: Scotland

Post Tue Apr 18, 2017 11:51 pm

Re: Chubb combination lock fail

I had to go to the extra trouble to mount the lock this way, as the threadding, and slot for spline key, only goes part way up the spindle.
PreviousNext

Return to Safes, Strongboxes & Combination Locks

Who is online

Users browsing this forum: No registered users

cron
Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware