FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

What have you picked today

<<

greengrowlocks

Familiar Face

Posts: 76

Joined: Sun Aug 06, 2017 11:51 am

Post Wed May 23, 2018 2:35 am

Re: What have you picked today

I been trying this technique for awhile and have attempted it on three different locks. For some reason it worked just now. I used two rows of small magnets attached to a toothpick via heat shrink. I jiggled the magnetic toothpick before picking the pins and than insert it again after each individual pin was set. I can feel the magnets in the lock move when the tooth pick is inserted but the lock gave no indication when they are set.

Miracle Magnetic
Image

Magnetic Toothpick Jiggler and key
Image
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Fri Jun 08, 2018 9:58 am

Re: What have you picked today

Sargent and Greenleaf 833 - 6 Pin Biaxial MIL Restricted profile

Image

Take that Uncle Sam!

Image

Take that, obscure British lockmaker!

adi_picker
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Wed Jun 13, 2018 10:34 am

Re: What have you picked today

Wow! Schooled on Squire, thanks Peter.

Medeco Padlock

Image

S&G 826 - Medeco Core

Image

Both of these locks were a good challenge for me, but particularly the Medeco branded one at the top, as it was quite worn, and came to me with no key, meaning there was definitely no rotations preset. Took me a good few days of picking on and off to really get the hang of rotating the pins, especially out of false gates, which I guess I hadn't actually encountered all that much in my previous Medecos until these two padlocks. The S&G wasn't as bad, with only 4 pins requiring rotation, but due to the more restrictive keyway I stopped and made a thinner version of my DCAP lifter to fit between the wards. Overall a good day, definitely feel I have a a better handle on rotation now!

adi_picker
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Sat Jun 16, 2018 12:34 pm

Re: What have you picked today

More Medecos!

5 Pin Classic, slightly restricted profile.
Image

Thanks go to GreenGrow for this beaut!

5 Pin BiAxial
Image

New style, 3 spools, 2 ASSA barrels.

50 series Padlock
Image

These have a Cam style core from what I can tell, although I haven't been able to figure out how to disassemble it just yet. If anyone could enlighten me, it would be awesome. I don't buy locks for their collect-ability, but I really do like the patina on this one :)

adi_picker
<<

Oldfast

User avatar

OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer

Posts: 4168

Joined: Thu Mar 31, 2011 3:16 pm

Location: Michigan

Post Wed Jun 20, 2018 4:22 am

Re: What have you picked today

adi_picker & greengrowlocks... Although I spin a great deal more than pick nowadays, I still really enjoy keeping a close eye on this thread. I just wanted to say I'm thoroughly impressed with the onslaught of high-end shit you guys have been plowing through over the last year or two. Certainly an inspiration to many. I'll bet you've helped more people than you even realize! Sometimes simply seeing that something can be done is enough of a jump-start to get moving.

Keep up the great work... and thanks for sharing.
" Enjoy the journey AS MUCH as the destination."
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Thu Jun 21, 2018 3:12 am

Re: What have you picked today

Thanks OldFast!

I just consider myself lucky to be at a time where I have a good work life balance. I have enough income to be able to purchase new locks, and enough time to be able to pick them. I'm still enjoying the challenge of this open-ended pursuit, so hopefully I can keep moving onto new locks. I have a Fichet in the vise today, come a long way to get to my little corner of Australia!
adi_picker
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Thu Jun 21, 2018 10:14 am

Re: What have you picked today

American 6200 Series w/ Medeco Classic Core
Image

Think this has already been mentioned here somewhere before, but this lock contained a Classic core, though strangely it sported a BiAxial logo on the face. Perhaps in a crossover period, or maybe plugs being diverted between stages of the manufacturing process?

Medeco M3
Image

Finally managed to get my hands on an M3 at a decent price.

adi_picker
<<

huxleypig

User avatar

The Prestigious and Powerful Porcine Prelate

Posts: 939

Joined: Wed Jul 14, 2010 10:59 am

Location: West Mids, UK

Post Thu Jun 21, 2018 10:54 pm

Re: What have you picked today

Abloy Protec:

Image
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Thu Jun 21, 2018 11:21 pm

Re: What have you picked today

Congratulations Hux. Differences aside, that's one hell of an achievement.

adi_picker
<<

huxleypig

User avatar

The Prestigious and Powerful Porcine Prelate

Posts: 939

Joined: Wed Jul 14, 2010 10:59 am

Location: West Mids, UK

Post Fri Jun 22, 2018 3:45 am

Re: What have you picked today

adi_picker wrote:Congratulations Hux. Differences aside, that's one hell of an achievement.

adi_picker


Thanks man, it is a watershed moment for sure. All the previous efforts have lead up to defeating this lock.
<<

adi_picker

Familiar Face

Posts: 127

Joined: Wed May 18, 2016 11:13 am

Location: Australia

Post Fri Jun 22, 2018 10:30 am

Re: What have you picked today

More from the 'I finally found one to buy!' series.

ASSA 600 - New style barrel drivers throughout
Image

This was great fun to pick! Light tension required due to the heavy countermilling.

EVVA DPI H24 Padlock
Image

Crazy keyway, but did have cutouts for the pins through them, so a tall pick was the order of the day. Surprisingly for an EVVA, not particularly hard.

adi_picker
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3563

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Fri Jun 22, 2018 11:25 pm

Re: What have you picked today

huxleypig wrote:Abloy Protec:

Image


Outstanding work, Hux!!!

:hbg: :whip: :hammering:

... and a well deserved standing ovation!!!

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3563

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Fri Jun 22, 2018 11:32 pm

Re: What have you picked today

BTW, Hux, about how long did it take to pick it once you worked out the tool?

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

Oldfast

User avatar

OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer

Posts: 4168

Joined: Thu Mar 31, 2011 3:16 pm

Location: Michigan

Post Sat Jun 23, 2018 4:11 am

Re: What have you picked today

.


:shock:


:salute:
" Enjoy the journey AS MUCH as the destination."
<<

Oldfast

User avatar

OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer

Posts: 4168

Joined: Thu Mar 31, 2011 3:16 pm

Location: Michigan

Post Sat Jun 23, 2018 4:12 am

Re: What have you picked today

THAT's dedication :yep:
" Enjoy the journey AS MUCH as the destination."
PreviousNext

Return to Lock Picking

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware