FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

new to locksmithing

<<

skylab9999

Newbie

Posts: 3

Joined: Sun Aug 04, 2019 5:07 pm

Post Sun Aug 04, 2019 5:24 pm

new to locksmithing

i have always been intrested in lockpicking,i recently bought two tools a,

kronos mulitpic and a tubular pick, i am intenting to start a small business specializing in lock outs of residential customers,and perhaps some commercial jobs like office entry and opening filing cabinets. i will keep my website simple and make it clear that i only do a few types of jobs. and give much lower rates than my competitors

as soon as i told my freinds i will start doing this the first question was can you open a car, so i started searching for car opening devices,it all looks very complicated ,but i saw a double sided pick and a tension tool to pick car locks, where do i get this and can it be mounted on my kronos multipick?

any recommendations of what tools i should have to do simple opennings would be appreciated, i will buy a plug spinner soon and a key extractor set, any other suggestions?
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1147

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Sun Aug 04, 2019 6:44 pm

Re: new to locksmithing

Because of the questions you ask I strongly suggest you do some learning before you start your business and before you start to buy tools which you do not need. There are good locksmith books and I am sure there are also lots of classes. There is also a lot on the internet, but not all is relevant for your purpose.
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

skylab9999

Newbie

Posts: 3

Joined: Sun Aug 04, 2019 5:07 pm

Post Sun Aug 04, 2019 7:08 pm

Re: new to locksmithing

:before you start to buy tools which you do not need",

yes exactly my request ,

if i am only doing deadbolts with either a lockpick gun or an electric pick or doing openings using a tubular circular pick tool then i think I dont need a lot of equipment

this kronos pick is fantastcaly easy to use

if it wont open with my tools then i would not have a service charge, but refer them to a more qualified pratictioner, i am 65 and doing this to supplement my pension

i been figuring a few things myself but it alawys helps to get some feed back, as i have a limited budget and cannot buy tools i dont need
<<

MartinHewitt

User avatar

Prolific Poster

Posts: 1147

Joined: Sat Nov 26, 2016 6:19 pm

Location: Germany

Post Sun Aug 04, 2019 9:14 pm

Re: new to locksmithing

Are there really tubular locks which people need to be picked where you live? Here it would be one of the most useless tools.

So you have actual experience with the Kronos opening many different locks? Or is your opinion just based on what you have seen what others can do with it?

I think you are missing the big picture with this business. And without it is not possible for you to decide in which direction to go and how to invest 50 bucks in tools, so that you can service the most customers. Also only with a bigger picture you can ask the right specific questions.

A good book seems to me to be "The Complete Book of Locks and Locksmithing" by Bill Phillips
In case you wonder ... Martin Hewitt is a fictional detective in stories by Arthur Morrison:
Martin Hewitt, Investigator Chronicles of Martin Hewitt
<<

skylab9999

Newbie

Posts: 3

Joined: Sun Aug 04, 2019 5:07 pm

Post Mon Aug 05, 2019 4:57 pm

Re: new to locksmithing

ok thanks your right i will get that book asap
<<

chieflittlehorse

Active Member

Posts: 344

Joined: Mon Jun 16, 2008 4:58 am

Location: Los Angeles, CA

Post Tue Aug 06, 2019 3:32 am

Re: new to locksmithing

Good luck on your endeavors. I was always a shop locksmith but now I've been on the road for 4 months with this new company.

For just doing lockouts, a air wedge from Home Depot and a long reach tool will do for starters.

For most locks I've been using bump keys a lot.

A basic pickset and a plug-spinner come in handy.

Also an under the door tool.

I've used a small crowbar on a Salto mortise lock because it malfunctions.

Best of luck.

CLH!
You leave my GRAPHITE alone!!!

Return to Introduce Yourself

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware