Got around to making a dedicated dimple pick!

[Alaphablue]

Has any one tried to pick a dimple lock with a Peterson American bypass tool it seem to be the right shape?

[Pickingpaul]

great home brew, ive got one of those ISEO R6, never picked it

[femurat]

Nice template mjollnir54, which locks did you test it with?
I'll check the measurements and let Pickingpaul know if it's good for the R6.
As rai said, rounding off the edges improves a lot the pick maneuverability.

Cheers

[LocksmithArmy]

Has any one tried to pick a dimple lock with a Peterson American bypass tool it seem to be the right shape?

yes... in one of my yt vids there is a pick I made from the american bypass tool...
http://www.youtube.com/watch?v=CurTlXTq3rU
I plan tomake more soon

Hey LSA, is that iseo the one I sent you last year? I'm happy if it's still around.
Cheers

no thats not the lock you sent... that the locks I had before that I sold... and missed... and you sent one to replace it
I still have the one you sent... its fun too

[femurat]

I'm glad you like and still have it

[Alaphablue]

I new I got a extra for a reason thanks lsa Going to get a set of cliff picks they are on my short list and look wicked !

[mjollnir54]

@ femurat
I tested it on "ABUS Extra Classe", the measurements are OK....

[GWiens2001]

Nice template, mjollnir54. Will make it today and test it out. And the OP has a very nice pick.

May be my old template can help you (I made it years ago) ?



I hope so....

[femurat]

Finally remembered to measure my favorite dimple pick, very good for Iseo R6. The width and length of the tip are 3 mm, it's shaped like this ===\_/ so the very tip is 2 mm wide.
The shaft is one millimeter thick and 28 mm long.

Cheers