Schuyler Towne's pick templates

[abroxis]

Some of you may be interested in seeing what our friend Schuyler has come up with for his picks.


https://ia701203.us.archive.org/4/items/2012-schuyler-towne-rev3-cad-etching/CAD_and_Etching.zip

[abroxis]

cadpick.JPG

OH MY GOD

I took a few minutes to print to pdf one of the cad drawings.

I never realized how complicated a CAD drawing would be .

Does each of those measurements have to be entered one by one or is the process automated.

01-13.pdf

[clearmoon247]

would it be possible to create a printable 8.5x11 pdf of the picks?

[Aedalas]

would it be possible to create a printable 8.5x11 pdf of the picks?

There is a .PDF included, but if you do it right it will take a couple pages.

[clearmoon247]

the pdf is actually a 24x6 so getting it to be 8.5x11

[abroxis]

The files include everything needed for anyone with basic cad skills. Each pick is individual in dxf or dwg format.

[Aedalas]

the pdf is actually a 24x6 so getting it to be 8.5x11

I'm at home now and don't have a printer so I can't try this (I did it at work earlier and it came out right) but I think this is how I did it.

Open the .PDF and scale to 100% (Not sure this is necessary).

1.jpg

Switch to "actual size."

2.jpg

Switch to "Poster."

3.jpg

It should now be 33x8.5 which is 3 standard pages.

[gnarus8429]

Here you go. All on one page. They are pretty close to scale when you print them out but, I left one of CAD measurements in at the bottom for good measure. Undoubtedly one of the best done sets of profiles that I have seen out there.

pick profile.pdf

[abroxis]

Gnarus .....thank you for doing that template . It has help a lot of us and is appreciated.

[s1deshowmick]

Gnarus .....thank you for doing that template . It has help a lot of us and is appreciated.

Sure did...Cheers.

[magician59]

D 'yam! I want my $80,000.00 back.