S&G Environmental Homemade Key

[MrPharmer2012]

https://www.youtube.com/watch?v=vkkmxQVnV4Q
temporary key with dowel rod working on a jb weld one until i can get materials to make a metal one.

[MBI]

Nice work. I wonder how long a wood key would hold up in the meantime, until you can make a metal one.

[MrPharmer2012]

Had I used oak or a different hardwood it probably wouldn't be too bad but pine isn't fonna last long the disk have already after maybe ten times opening smashed groves into key I just kind of made it for the hell of it to see if I could thanks for pic sour it worked first try after eyeballing it from ur drawing and picture no measuring devices were used on this all freehand

[uklockpicker]

Haha brilliant

[10ringo10]

How did you work out what the key looked like,just from the photo. But to make one that worked.wow

[MrPharmer2012]

Jb weld was not strong enough busted off when I started turning key

[Spyder]

what about using an appropriate diameter of brass tubing, and slitting / halving it, and use that to hold your JB weld? as a strongback, or for that matter, would just cutting the tubing to the appropriate bitting work? I've never had an environmental, do the wafers touch the edge of the bitting or the face?