Custom Lock Holder/PinningTray

[gnarus8429]

I built this setup for myself but, I got about 40 of the panavise mounts for free and thought that I would give selling them a go. Let me know know what you think. If you like a custom setup let me know and if I can I'll do it. The pinning tray is custom laser cut so any changes that you would like there let me know. Any thoughts would be great!

http://www.ebay.com/itm/110840063788?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1413

[MBI]

I like it. I think I'd like to order one, but I'll have to think about the pinning tray if it's something that can be customized. I'd want it a bit bigger but I'll have to think through exactly how I want it.

[ChemicalRobot]

That is so cool!! I'd buy one in an instant if the tray had larger spaces for the pin-stacks and if the board didn't have the viles/hex-wrench cutout slots.

[piotr]

I like it too! I'll PM you my address so that you can get me a quote on shipping.

[Tarquin]

Wow, that's pretty cool. I'm kind of diggin' that.

[jeffmoss26]

YES! Put me down for one too but I don't need the vials...

[Oldfast]

Looks very nice. I hope you do well with em' and continue to make more. Keep up the good work!

[Warder]

Looks very nice. I hope you do well with em' and continue to make more. Keep up the good work!

[magician59]

Very nice! You may find you'll need to buy a whole lot more pan-a-vise mounts, before it's all over.

[gnarus8429]

DSCN3289_cr.jpg

This a a final version that I did for Jmoss. The vials were removed and a second pinning tray added. After reading the thread on the new pinning mat design for sparrows I will be doing a tray the has three slots for each pin stack and do a total of 7 pin stacks instead of six. I'll post them when I get them cut.

[mastersmith]

Yet another manufacturer that listens to us, this is becoming epidemic! Very nice work. I can't wait to see the version 3.

[jeffmoss26]

Very excited!!

[MBI]

This a a final version that I did for Jmoss. The vials were removed and a second pinning tray added. After reading the thread on the new pinning mat design for sparrows I will be doing a tray the has three slots for each pin stack and do a total of 7 pin stacks instead of six. I'll post them when I get them cut.

I like it! Please keep us updated when the new version is ready.