Pin stuck in plug
I was re-pinning it, too many spools for me to get it open, and I had it all back together right. But I went to pull the key out before replacing the clip on the back for some reason. The plug pulled out a little and the last pin got caught in the groove for the retaining clip.
Is what it looks like now. From front to back it has a pin in 1 and 2, 3 and 4 are empty, 5 is pinned and 6 is empty (5 pin lock with 6 possible). I'm pretty sure that the number 5 driver is now in the groove while the key pin is in 4's position. I've not come up with any way to actually touch the pin as the groove doesn't go all the way through the plug like a pin hole would.
Any ideas on what to do here?
EDIT: Fixed image.
"People dont kill people with giant boulders"
"They will if you take away their assault rifles"