Professor Emeritus Of Lockpickology and Smithery
Posts: 1107
Joined: Thu May 14, 2009 1:23 pm
Location: Indiana
Stanley Vidmar SL10
Front of lock and key.
Back of lock.
Side view with pin on left that holds cylinder in place.
Inner housing with 40 holes, key can be removed every 1/4 turn once removed from outer housing. Spring and brass pin are for installing in cabinet.
More inner housing.
10 brass sliders.
Brass retainer, push down to remove plug.
Brass retainer.
10 sliders with operating key inserted. Super sloppy lock, all kids of wiggle room in this thing.
Sliders with key partially removed.
All 10 sliders.
Slider.
Slider.
One tough pin to remove, this is how it looked when I was done.