Defeating electronic padlocks ...
http://www.rapidonline.com/sku/Electric ... 46/43-3156
ChicoSlim803 wrote:EMP
bouncer965 wrote:ChicoSlim803 wrote:EMP
EMP??? Electro magnetic pulse???
the lockpickkid wrote:I want one for my tool locker in my carport, this would be a big theft deterent. As for defeating??? Well, tp pick it isn't easy and the alarm would go off, I would fill a beaker full of acid and carefully immerse what I could of the lock into it without moving it much, then the acid would eat up parts of the lock and hopefully tear up the electronics of it, then I would bolt cutter, and be gone!!
What do you think!!! LOL!
the lockpickkid wrote:I want one for my tool locker in my carport, this would be a big theft deterent. As for defeating??? Well, tp pick it isn't easy and the alarm would go off, I would fill a beaker full of acid and carefully immerse what I could of the lock into it without moving it much, then the acid would eat up parts of the lock and hopefully tear up the electronics of it, then I would bolt cutter, and be gone!!
What do you think!!! LOL!
Solomon wrote:So, the alarm goes off with even the slightest touch? That's pretty crazy. I'd get one and hang it on the inside of the doorhandle, lol... so if someone tried to come in through the door they'd think I had a crazy alarm system.
Solomon wrote:"Operation
Insert the key and turn clockwise to release the shackle and re-fit the shackle with the groove near to the key port. The lock will beep to indicate that the alarm is active. The padlock will be alarmed after 30 seconds. Turn the key anti-clockwise to lock the unit. The first time the alarm is triggered the unit will provide a triple beep warning. This allows you to unlock it without setting off the alarm. The next trigger will cause an alarm. To Turn Off The Alarm Unlock the padlock and remove the shackle."
So, if you move it to get at the keyway, it will perform a warning beep. If you move it once more, it's alarm time... I imagine picking would set it off, so you'd need to pick the lock by the time the triple beep has finished. Can't see that happening... but the circuit seems to be completed by the shackles contact with the padlock body. All you need is a way to interrupt the circuit somehow.
Return to Awol's Research & Development
Users browsing this forum: No registered users