ISEO lock help needed.
5 posts
• Page 1 of 1
I've picked up one of my old locks that i haven't yet opened and i'm now devoting my lock time to cracking it. I need some info help really. THIS is the lock. Its an ISEO High safety Boxer padlock fitted with 40mm half euro cylinder. Has anyone got a euro cylinder in its own? To sell or just pictures of it stripped? Also i want some key blanks. I can buy them myself but i'm not sure what blank it is. If someone could supply me a key cut to lowest depths that would be great so i can TRY foil impression it. There are some side pins aswell. The R6 keys don't fit this cylinder by the way. Any info and help greatly recieved.
Re: ISEO lock help needed.
Thanks for reading guys but i've now cracked the lock.
The lock is just like this but a single euro, even the spool pins are in the exact same place.
Here is the whole lock stripped
Here is the lock body
The pins. Key pins at the bottom, then above the top pins, then the side pins above those. Then the driver pins above the side pins ( notice pins 1,3,4,6 are all spool) the the springs top.
Here is the cylinder hull and plug with cam and circlip
Here is the plug showing the holes for the key pins
Here is the plug showing the top pins
Here is the plug showing the side pins
And finally the keyway
The lock is just like this but a single euro, even the spool pins are in the exact same place.
Here is the whole lock stripped
Here is the lock body
The pins. Key pins at the bottom, then above the top pins, then the side pins above those. Then the driver pins above the side pins ( notice pins 1,3,4,6 are all spool) the the springs top.
Here is the cylinder hull and plug with cam and circlip
Here is the plug showing the holes for the key pins
Here is the plug showing the top pins
Here is the plug showing the side pins
And finally the keyway
Re: ISEO lock help needed.
if you can upload the photos to another server. servimg.com is very bad
Re: ISEO lock help needed.
wow that looks fun
http://www.youtube.com/aarpazthelockpicker Take a look
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users