Help- Does anyone have capability to make trioving key

[MrPharmer2012]

Riyame thanks for the tip on posting, ED do you have any spare 7 pin keyways I could maybe just swap the inner cylinder to match the available 7 pin blank, so I can get a key with it? also where can i find depth and spacing for trioving, this lock is under the radar for sure on having info available for it.

[MrPharmer2012]

Got my new tray printed and front loading tools printed

[femurat]

Nicely done! I like the idea of putting your name on the tray.

Cheers

[jeffmoss26]

ooh very nice!

[mdc5150]

20180316_084710.jpg

[MrPharmer2012]

What HPC card is used for the trioving, or what trioving profile do i select on instacode can some one help me, or can someone give me all the depth and spacing for trioving padlock listed above so I can create a card on instacode?

[mdc5150]

What HPC card is used for the trioving, or what trioving profile do i select on instacode can some one help me, or can someone give me all the depth and spacing for trioving padlock listed above so I can create a card on instacode?

C419
That was why I sent a photo of that page which also has spaces and depths.

[MrPharmer2012]

What HPC card is used for the trioving, or what trioving profile do i select on instacode can some one help me, or can someone give me all the depth and spacing for trioving padlock listed above so I can create a card on instacode?

C419
That was why I sent a photo of that page which also has spaces and depths.

Sorry i now see the page, when i viewed it on my phone i did not see the image must not have been logged in or something
Thank you Very Much, what book are you using with that in it by the way?

[mdc5150]

What HPC card is used for the trioving, or what trioving profile do i select on instacode can some one help me, or can someone give me all the depth and spacing for trioving padlock listed above so I can create a card on instacode?

C419
That was why I sent a photo of that page which also has spaces and depths.

Sorry i now see the page, when i viewed it on my phone i did not see the image must not have been logged in or something
Thank you Very Much, what book are you using with that in it by the way?

It comes with the HPC Codemax.

[MrPharmer2012]

What HPC card is used for the trioving, or what trioving profile do i select on instacode can some one help me, or can someone give me all the depth and spacing for trioving padlock listed above so I can create a card on instacode?

C419
That was why I sent a photo of that page which also has spaces and depths.

Sorry i now see the page, when i viewed it on my phone i did not see the image must not have been logged in or something
Thank you Very Much, what book are you using with that in it by the way?

It comes with the HPC Codemax.

oh ok

[GWiens2001]

Any chance of getting copies of the tools you printed? They look great! It would be a fun trial to print.

Gordon

[MrPharmer2012]

Any chance of getting copies of the tools you printed? They look great! It would be a fun trial to print.

Gordon

sent PM

[pennme]

MrPharmer2012, the Ving padlock that you have shown, looks like an M9 keyway. There is virtually 0% chance of ever getting a blank for this. Ving is crazy tight about these keyways being available. Sorry I couldn't be more help, but at least you now know the correct keyway.

[einherjer]

It is not the "favorit" keyway as mdc5150 suggested (that one is only on houselocks). The padlock 5652 was much used by everyone + state in the 90`s, in Norway. So I shall look around.
I know for sure that I`ve have this keyway on a couple of Trioving`s it is only (pretty sure) on their padlock`s
If you only knew the name of keyway, it would make it so much easier for me
I`ll get back to you soon. gonna look in to it

[einherjer]

posted before I read thru all the posts, yes its a restricted keyway I agree with lock-ed.