Wed Jun 21, 2017 9:24 pm by tarboxb
No problem John Locked. It sounds like you are already well on your way then! I have seen where some locks can have the wheels and drive cam in such a way that occasionally the fence will hit the wheels before the lever nose touches the drivecam. What happens is that the lever is lifted above the cam so you may not feel one or any of the contact points. Try to tilt the dial a bit and see if that helps, also move the wheels to different places when you check for CPs. For example, park them all at 25, 50, 75, 0, etc. Sometimes this phenomenon will happen when they are at one or some points and not others. In the extremely unlikely scenario that nothing gives you contact points, the next thing would be to focus on trying to find places where the fence may be indicating gates on the wheels by simply rotating all the wheels together and feeling for snags, etc. It may take some work but if you are able to ID a gate this way, hopefully you will then get contact point readings when that gate is under the fence.