S&G 6730 Manipulation Nightmare
Now, looking at my graphs, I noted an obvious gate on my first AWL rotation which turns out was on wheel 2. I also noticed two potential gates, one at 48 and another at 73 or so. Interestingly enough, number one turned out to be 73! I wish I pursued that a little bit more. 48 was nothing. I decided to test the gate at 34.5. I moved one wheel at a time from the number and noted when the contact area moved, as soon as I moved wheel three it opened up so I decided that it was on wheel 3, it wasn't. In hindsight, I think I may have accidentally moved all of the wheels off the target when I did this... After doing a graph of 1 and 2 AR with 3 on L33, I noticed the gate again around 33-35. At this point I amplified it, made up my mind it was at 34.5 and through a high/low test tagged it to wheel 1. Several graphs in, I located wheel three's gate at 28.5. After a bunch of brute forcing, how/low tests, etc. I finally gave up. Obviously I was quite close. In hindsight I think I see a slight gate signature with the peaks on either side but no fall on the right contact point and the fall but no rise on the left contact point around the area where the first wheel's gate is.
I'm sorry if this is long and rambly, I am just trying to explain the manipulation to the best of my ability and my thought process so it can be critiqued. Fire away!