CNC Picks
I made a fixture and super glued a piece of feeler stock in place. I managed to machine a gem out of 0.013 and 0.020 and they came out beautifully!
This is pretty exciting! Now I can make custom picks without all the handwork
The first one I made came out rough due to a dull endmill.
After a few minutes with sandpaper and a buffing wheel and bam!
Then I made one out of 0.020" stock.
Here is the edge of the 0.020" pick. I'm proud of this one it came out nice!
I took some video if the machining and I'll post it up later today or tomorrow.