My notes for Access Control work
So I then planned to watch Youtube to figure out how other people install mag locks, electric strikes, etc. I saw how they would put up cones and caution tape for the safety of people they'll be working around with, especially when people are walking thru your work area.
Watched some videos and learned that you should have skills in basic cables, terminating cables, crimping, and the proper tools and techniques for such skills.
Sometime I just took notes on the types of drill bits needed, especially if you have to mount things to concrete/brick/masonry type stuff.
You also need to be able to test your wires, trace wires, run wires, choose the right wire, etc.
Sometimes you need to learn how to install, use, and teach the various software that comes with the hardware, especially in CCTV monitoring software or other access control programs.
From what I got from my one day of studying, I came to the conclusion that you can accomplish about anything IF, and that's a big IF, IF YOU HAVE THE RIGHT TOOLS. but you also NEED THE RIGHT KNOWLEDGE. The proper tools and the proper knowledge will take us way into the a profitable future.
So here's some of my rough notes.
CLH!