FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Removal of stuck cores.

<<

tpark

Contributor
Contributor

Posts: 180

Joined: Fri Nov 13, 2015 10:17 pm

Location: Alberta, Canada

Post Fri Dec 23, 2016 11:46 pm

Removal of stuck cores.

Hi - I've encountered a problem with some old fleabay padlocks, and I was hoping someone here may have some additional insights.

I purchased a lot of Navy padlocks from eBay, and with the help of some WD-40 I picked one to control and made a control key and operating key. I was able to operate/remove the core from a number of the locks, but some of them I couldn't operate or remove the core. What techniques do you know of to get the old cores out? Soaking in WD40 and bashing the lock with a mallet doesn't open all locks. I'm assuming that locks stamped with the same number are keyed alike. Even though the control key turns and the core comes out a bit, I can't get the sucker out of some of them,
<<

selim

User avatar

Diabolical Pinning Master & Lock Philanthropist
Diabolical Pinning Master & Lock Philanthropist

Posts: 357

Joined: Wed Jun 11, 2008 12:31 am

Location: Maine

Post Sat Dec 24, 2016 12:33 am

Re: Removal of stuck cores.

Try putting the core in a vise, I use thick cardboard so the core won't get wrecked. Take an adjustable wrench, and clamp it on the core, an try to force it to control
<<

Riyame

Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares

Posts: 1919

Joined: Sun Jul 24, 2011 5:16 pm

Location: Canada

Post Sat Dec 24, 2016 1:08 am

Re: Removal of stuck cores.

If they turn to control but the core does not come out put the key in a vice and pull really hard on the shackle. Sometimes the locks get bent and trap the core, some are just naturally tighter than others ;) ;) :lol:
PhoneMan: I always knew I'd say something stupid and it would be someone's sig
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(

If life gives you melons, you might be dyslexic.
<<

selim

User avatar

Diabolical Pinning Master & Lock Philanthropist
Diabolical Pinning Master & Lock Philanthropist

Posts: 357

Joined: Wed Jun 11, 2008 12:31 am

Location: Maine

Post Sat Dec 24, 2016 5:20 pm

Re: Removal of stuck cores.

very good advise ,, riy,, I'll keep in mind
<<

tpark

Contributor
Contributor

Posts: 180

Joined: Fri Nov 13, 2015 10:17 pm

Location: Alberta, Canada

Post Sun Dec 25, 2016 12:28 am

Re: Removal of stuck cores.

Well, I got a few more of them open, perhaps giving the lubricant a bit of time helps. Cutting the keys a tiny bit low then giving them some encouragement with a mallet got one more core out.

For the curious, here's the pin information, 1 is closest to tip, first column is pin.

Stamp on core: 19E34

1: 3,2,12,6
2: 2,6,6,9
3: 5.2,12,4
4: 1,4,10,8
5 6,2,4,11
6: 3,6,8,6

Stamp on core: 20E34
1: 6,2,4,11
2: 2,4,10,7
3: 5,2,12,4
4:1,6,6,10
5: 4,2,12,5
6: 3,4,4,12

Most of the locks were 19E34, only one 20E34

Return to BEST

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware