.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Well, tonight I decided to try and pick open an enviro I got off of Ebay without keys. it wasn't going so well, so I decided to try and pick some of my enviro's that I had a key for, so I could get the feel for it. well, that worked, I picked open my 104 and then a 109. I finally went back to the unknown one, and finally defeated it! it hadn't been opened in quite some time! I decoded it after picking and discovered it's a 101 Pics below!

Did you use a hook or custom tools and can you post photos of pick and wrench used, as well as did you top or bottom tension the lock.

Thanks!
Squelchtone

these dont require a TW

How did u decode this padlock do u have specs on each key

Great job KM! its a good feeling to open a lock that's this big and cool



the shallowest cut on the key operates the cam, align discs and turn the correct one. i use a southord dimple handle and a small pick i made for them. dont have a pic handy but it looks like this
|
0
i just got a 5 disc big enviro from a guy that was missing parts, was a absolute PITA to re-assemble that thing for him.

Thanks guys! it was a real treat! the only thing I used was a Peterson Pry bar, it's not a perfect fit, but it works. once the lock is picked open, the keyway is so large, you can look in, and see where you stopped all the discs. then I use Sour's posting here that shows the keys he has had, and I deduced which one it was.
I think I'm going to order another prybar so I can grind it down to the proper size for "picking"

Nice picking! I would love to see you pick one on video.