FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Need Some 826 Help

<<

mister sour

User avatar

I've Been Banned!!
I've Been Banned!!

Posts: 1209

Joined: Fri Mar 11, 2011 5:07 am

Location: Missouri

Post Sat Mar 03, 2012 3:15 am

Need Some 826 Help

I have a guy that has a 826 padlock. When he opens it, hes able to remove the shackle completely. I know that means the little pin at the bottom is missing, I just need some advice on how to repair it.
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 379

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Sat Mar 03, 2012 5:29 am

Re: Need Some 826 Help

It is just a roll pin drill or press old pin out and use needle nose vise grips to Reach in and reinsert new one once shackle is replaced
Image
<<

mister sour

User avatar

I've Been Banned!!
I've Been Banned!!

Posts: 1209

Joined: Fri Mar 11, 2011 5:07 am

Location: Missouri

Post Sat Mar 03, 2012 5:32 am

Re: Need Some 826 Help

MrPharmer2012 wrote:It is just a roll pin drill or press old pin out and use needle nose vise grips to Reach in and reinsert new one once shackle is replaced

do u know the diameter of said pin?
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 379

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Sat Mar 03, 2012 1:04 pm

Re: Need Some 826 Help

I don't off hand my 826 has same issue I asked locksmith and he said that is how he repaired a hunting clubs padlocks he sad it is closest you can get to original
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 379

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Sat Mar 03, 2012 1:05 pm

Re: Need Some 826 Help

I'll trY to find out Monday
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 379

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Mar 06, 2012 1:08 pm

Re: Need Some 826 Helpe

Pushed pin out last night
Image
It is .07-.075 thick pin is a little oblong from being pressed thru
Image
Image
Image
The shackle is .5 wide the Chanel the pin rides in is aprox. .07-.09 so I wouldn't make pin longer than .6 but length isn't that big of an issue as long as the pin doesn't stick out to far or not enough it just needs to hold shackle in push in and keep turning shackle till it fits . U take everything out ad place shackle in just till it is below the cross bar on shackle side just to where u can see hole place roll pin in taper one end place a punch or something solid on end of pun and lightly tap in with hammer till fits and turns freely in channel
Image

Return to Sargent & Greenleaf

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware