FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Mul-T-Lock Mogul Picked and Gutted

<<

KokomoLock

User avatar

Professor Emeritus Of Lockpickology and Smithery

Posts: 1107

Joined: Thu May 14, 2009 7:23 pm

Location: Indiana

Post Thu Dec 17, 2009 4:11 am

Mul-T-Lock Mogul Picked and Gutted

A Mogul cylinder is one used on prison locks and is very large compared to a standard mortise cylinder. I purchased this on off ebay with no key.

Image

Mogul Vs. ASSA Front.

Image

Mogul Vs. ASSA Side.

Image

Mogul Picked !!!!!

Image

MTL pins, drivers 2 and 4 are mushroom, #4 also has master inner and outer pin, keypin 3 is a solid no inner pin master key pin.

Image

Side Pins, passive key profiling, to ensure correct key is used.

Image

Holes in plug that align with side pins, if a key is inserted without the side pin cuts, the side pins are forced out of the plug and into the holes in the housing preventing rotation.
<<

LocksmithArmy

I've Been Banned!!
I've Been Banned!!

Posts: 1418

Joined: Fri Oct 16, 2009 3:14 am

Location: Knoxville TN

Post Thu Dec 17, 2009 4:24 am

Re: Mul-T-Lock Mogul Picked and Gutted

lets see... yo uonly won it off ebay a few days ago (week topps) plus shipping... so it couldnt have taken you long to pick it...
woohoo go prisons lol

nice job man
Image
Pokey wrote:"Come and get me, loser! Spankity spankity spankity!"
<<

ToolyMcgee

User avatar

Active Member

Posts: 576

Joined: Sat Jul 19, 2008 8:27 am

Location: Kokomo, Indiana

Post Thu Dec 17, 2009 4:26 am

Re: Mul-T-Lock Mogul Picked and Gutted

Great pictures man. I can't get enough of the mogul cylinders. You are really mowing down those MTL's. Maybe you should slow down and take a few minutes on the next one...
<<

elbowmacaroni

User avatar

Site Owner

Posts: 1353

Joined: Mon Nov 16, 2009 9:28 pm

Location: Florida

Post Thu Dec 17, 2009 5:10 am

Re: Mul-T-Lock Mogul Picked and Gutted

Dude! As a relative newbie those pins freak me out!
"Cave ab homine unius libri" - Beware of anyone who has just one book

(2014.02.09 - 23:26:03) huxleypig: i freaking love cream
(2014.02.09 - 23:27:11) huxleypig: hey, come on, cream is nice
(2014.02.09 - 23:27:37) huxleypig: aww, i suddenly feel very sick

(23:37:46) LocksmithArmy: you should see my school girl outfit
(23:37:50) LocksmithArmy: wait... what

(13:19:50) xeo: that chick will never be satisfied by a real dick
(13:19:54) NNFAK: I would man...

(22:59:49) PhoneMan: how do you let a forum die if users keep using it? kill the servers?

May those who love us, love us; and those who don't love us, may God turn their hearts; and if He doesn't turn their hearts, may he turn their ankles so we'll know them by their limping

If someone had prince albert in a can, does that mean they'd have a killer codpiece?

(00:52:02) WolfSpring: elbow could sell a sandbox to an egyptian
<<

Solomon

User avatar

Prolific Poster

Posts: 947

Joined: Mon Aug 17, 2009 12:00 pm

Location: Northern Ireland

Post Thu Dec 17, 2009 8:18 am

Re: Mul-T-Lock Mogul Picked and Gutted

Great pics! Are you doing a vid on it?
Image
<<

jruther2

User avatar

Captain Contributor / Pick Synthesis Fabrication Process Execution Specialist / Global Moderator
Captain Contributor / Pick Synthesis Fabrication Process Execution Specialist / Global Moderator

Posts: 522

Joined: Fri Nov 21, 2008 6:05 pm

Location: United States

Post Thu Dec 17, 2009 12:25 pm

Re: Mul-T-Lock Mogul Picked and Gutted

Crazy skills buddy! Great job getting that one picked...I'm with Tooly, you gotta slow down on those MTL's lol! Great pictures too, thanks for the post.
"An honest man is one who knows that he can't consume more than he has produced."
<<

uklockpicker

User avatar

The Supply Guy - Honored Benefactor
The Supply Guy - Honored Benefactor

Posts: 1232

Joined: Tue May 27, 2008 7:38 pm

Location: United kindom Uk

Post Thu Dec 17, 2009 1:16 pm

Re: Mul-T-Lock Mogul Picked and Gutted

Amazing skills bud,those pins really are irrrrrrrrrrr well god dam ugly evil looking things,no wonder i havent no were near picked one :roll:

Yep you do need to slow down on these mtl's
I feel another one coming on tho very soon 8-) ;)
Image
<<

.45cal

User avatar

Global Moderator

Posts: 415

Joined: Sun Dec 21, 2008 4:17 pm

Location: CANADA

Post Thu Dec 17, 2009 3:52 pm

Re: Mul-T-Lock Mogul Picked and Gutted

Good job on that monster lock!
what do you think the reason behind having a solid pin in one chamber instead of the pin in pin?
<<

HallisChalmers

Lord Emeritus of Keypicking HallisChalmers

Posts: 2070

Joined: Mon Apr 28, 2008 8:46 pm

Location: Hell

Post Thu Dec 17, 2009 3:55 pm

Re: Mul-T-Lock Mogul Picked and Gutted

I smell another "sticky" coming....great job Kokomo!

:)
<<

KokomoLock

User avatar

Professor Emeritus Of Lockpickology and Smithery

Posts: 1107

Joined: Thu May 14, 2009 7:23 pm

Location: Indiana

Post Thu Dec 17, 2009 4:49 pm

Re: Mul-T-Lock Mogul Picked and Gutted

.45cal wrote:Good job on that monster lock!
what do you think the reason behind having a solid pin in one chamber instead of the pin in pin?

From what I have read it is a standard part of master keying to defend against the Michaud Attack.

HallisChalmers wrote:I smell another "sticky" coming....great job Kokomo!

:)

Thank You very much !!!!!!!

Solomon wrote:Great pics! Are you doing a vid on it?

I received a MTL rim cylinder in trade with Uklockpicker that was the same keyway as the Mogul so I picked the rim cylinder and switched pins so I have a key for the Mogul. I will try to get the Mogul on cam !!!!!
<<

KokomoLock

User avatar

Professor Emeritus Of Lockpickology and Smithery

Posts: 1107

Joined: Thu May 14, 2009 7:23 pm

Location: Indiana

Post Fri Dec 18, 2009 3:07 am

Re: Mul-T-Lock Mogul Picked and Gutted

I had a request to show some pics of the tools I am using so here they are.

Image

This is the Souber Dimple lock pick set.

Image

These are the 3 tool I use on the Mul-T-Lock.

Image

This is the small single ended pick with a curve to set the inner pins.

Image

This is the large end of the double tool use to set outer pins and is chamfered to help get under the pins. Yes I cheat those are index marks I put on the tools :) .

Image

This is the small end of the double tool use to set inner pins also.
<<

jruther2

User avatar

Captain Contributor / Pick Synthesis Fabrication Process Execution Specialist / Global Moderator
Captain Contributor / Pick Synthesis Fabrication Process Execution Specialist / Global Moderator

Posts: 522

Joined: Fri Nov 21, 2008 6:05 pm

Location: United States

Post Fri Dec 18, 2009 3:20 am

Re: Mul-T-Lock Mogul Picked and Gutted

Nice looking picks you've got there pal. Thank you very much for the pictures. I love the index marks...I'm definitely gonna do that.
"An honest man is one who knows that he can't consume more than he has produced."
<<

awol70

User avatar

Mentor - 1st Class / Research & Development Kingpin / Prolific Videomeister / Global Moderator / The Guy You Wish You Were
Mentor - 1st Class / Research & Development Kingpin / Prolific Videomeister /  Global Moderator / The Guy You Wish You Were

Posts: 1653

Joined: Tue Mar 25, 2008 10:05 pm

Location: CANADA

Post Wed Mar 24, 2010 5:44 am

Re: Mul-T-Lock Mogul Picked and Gutted

great stuff!
thanks...maybe a close-up of the pins for the "photos of pins thread?
great addition.
" I Love the smell of napalm in the morning!....."

Image
<<

dgtlcrack

User avatar

Familiar Face

Posts: 39

Joined: Sat Mar 27, 2010 6:29 pm

Location: Vancouver

Post Wed Mar 31, 2010 2:47 am

Re: Mul-T-Lock Mogul Picked and Gutted

That's cool, but when you get it picked without a solid pin or master pins in the #3 and #4 chambers I will be madly impressed.
what happens is the inner pin of the top pin doesn't slide inside the solid pin in chamber #3, so the inner spooling effect doesn't take place, which it becomes almost like picking a normal pin. And in chamber #4 the inner top pin catches on the outter master pin and binds, then it's just a matter of pushing the outter bottom pin up, and adjusting the inner pin after the "large false setting" to push the rest of the inner master pin up into the plug. With your setup there, it's like picking 3 real chambers of a mul-t-lock interactive, and the other two chambers are like "bypassed" of their security found in a standard setting.

But that's still a wicked achievement, keep it up!
*- Digital Crack -*
"You want my knowledge, my answers, well you're going to get it the way I give it to you: with a grain of salt, logic, and nearly sarcastic common sense.... unless you are willing to pay, then I'll shut the hell up and you can be the boss"
<<

uklockpicker

User avatar

The Supply Guy - Honored Benefactor
The Supply Guy - Honored Benefactor

Posts: 1232

Joined: Tue May 27, 2008 7:38 pm

Location: United kindom Uk

Post Wed Mar 31, 2010 11:31 am

Re: Mul-T-Lock Mogul Picked and Gutted

souber tools England ) Hmm that gives me an idea :D
Image
Next

Return to Mul-T-Lok

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware