FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Mul-T-Lock MT5 Pin specs

<<

l0ckcr4ck3r

User avatar

Familiar Face

Posts: 179

Joined: Wed May 22, 2013 8:01 am

Location: NC, US

Post Fri Nov 20, 2015 11:42 pm

Mul-T-Lock MT5 Pin specs

Anyone able help me with an up-to-date service manual or other document that has the pin specifications for the MT5?

Specifically need to know what the overall lengths are and the height of the larger shoulders on the Key pins.

thanks

Image
<<

Werewolf

Familiar Face

Posts: 109

Joined: Sat Jun 11, 2011 10:00 am

Location: Belgium

Post Sat Nov 21, 2015 12:36 pm

Re: Mul-T-Lock MT5 Pin specs

Best I can find is this , page 28 to 38.
Trust me , I'm a locksmith
<<

l0ckcr4ck3r

User avatar

Familiar Face

Posts: 179

Joined: Wed May 22, 2013 8:01 am

Location: NC, US

Post Sat Nov 21, 2015 6:27 pm

Re: Mul-T-Lock MT5 Pin specs

Thanks Werewolf, i read Datagrams paper yesterday, a lot of good info in there.... just at the end, it was the one piece of info he hadn't updated. Someone from another forum helped out and ill post it here for anyone else.

Image
<<

Papa Gleb

User avatar

Contributor
Contributor

Posts: 1088

Joined: Fri Sep 05, 2014 5:10 pm

Location: Brooklyn, NY

Post Mon Nov 23, 2015 5:43 pm

Re: Mul-T-Lock MT5 Pin specs

I'm wondering why they still have only 4 pin sizes? I can decode the PIP bitting in seconds by eye and once I have that, a key can be duplicated. Yes it still wont open the lock but if I cut the key w. a hack saw or dremel straight down from bow to tip going around the alpha spring as close as possible, this made key will now satisfy the PIP and Alpha spring security of the lock leaving only the sliders which I believe are only 4 right? Just an idea that jumped to mind so feel free to correct me please!
<<

l0ckcr4ck3r

User avatar

Familiar Face

Posts: 179

Joined: Wed May 22, 2013 8:01 am

Location: NC, US

Post Mon Nov 23, 2015 9:03 pm

Re: Mul-T-Lock MT5 Pin specs

You may well be correct on the sliders. Non Masterkeyed sliders have 1 true gate and 5 false gates.
If the gate on the far left was used as the true gate, the slider would move too far right and jam up on the core housing.
The Gate on the far right will never align correctly before the slider bottoms out... so yeah i make it only 4 positions as well.

Return to Mul-T-Lok

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware