Page 1 of 1

Progressive pinning my Medeco classic

PostPosted: Fri Oct 16, 2015 8:31 am
by twenglish 1
Last night I made a huge break through, picked my Medeco classic with 4 pin stacks installed, finally starting to get a better feel for these locks, mine in particular seems to require fairly heavy tension to actually set the pins and with very little tension I am able to rotate the pins and feel them click into place, unless they are in a false gate, my classic is a 5 Pinner and I can't wait until I can do it with all 5 pins

Re: Progressive pinning my Medeco classic

PostPosted: Fri Oct 16, 2015 9:46 am
by Papa Gleb
Great work bud. I too noticed my classic required heavy tension to pick open.

Re: Progressive pinning my Medeco classic

PostPosted: Fri Oct 16, 2015 9:55 am
by twenglish 1
I still can't seem to set the sidebar completely before lifting the pins, I always have to go back and try to adjust them after the height is set, I read about the wiggle method of setting the sidebar where you kind pulse heavy tension (clockwise) as you rotate pins and you will feel more give in the plug when more pins are correctly rotated, I have been using a short hook but I think it is too wide as I have trouble with over setting the first pinstack