mystery keyway... HELP?

[awol70]

this is a mystery core...what i DO know is:
the core has serrated spools,and one regular serrated driver,plus serrated keypins....sound familiar?
yep! fits an american 1105,perfectly.
i took the core down to my locksmith bud and stumped not only him, but his boss as well.
no idea ...so please ,if you recognize this profile,or know of a blank that could be modded to fit,
please let me know.
i will pick it on cam, this week.

[USApicker]

have you tried sc1? the top half of the keyway looks kind of like an sc1..I would try filing off some of the botton of a schlage key.

[awol70]

have you tried sc1? the top half of the keyway looks kind of like an sc1..I would try filing off some of the botton of a schlage key.

just tested one out...looks possible (with a LOT of mods.)

[johnopsec]

That looks an awful lot like a Brinks keyway like on my Brinks Shrouded lock. I can tell you for sure that it's not a KeyMark.

[awol70]

That looks an awful lot like a Brinks keyway like on my Brinks Shrouded lock. I can tell you for sure that it's not a KeyMark.

nope..not an AM keyway...tried it.. =(

[USApicker]

what about an sc8? (scaled down version of sc1, I think?)

[USApicker]

this it?

http://www.blackbag.nl/?m=200710

[awol70]

this it?

http://www.blackbag.nl/?m=200710

no, thanks,tho..

[USApicker]

where did the lock come from?? some background knowledge would help.

[Jinglesanator]

It may just be an off brand that doesn't have a definite key blank to go with it. (Guess)

[ToolyMcgee]

Could it be American Lock keyway ATPKB11 or ATPKB12? You can go to their website and download the PDF to check out some of their keyways. I don't know what the generic blank is called, if there is one.

It's enough out of focus it's kinda hard to guess. Did you try photographing it with a black background?

-Tooly

[USApicker]

is it one of these?

http://www.americanlockimages.com/Categ ... parent=802

[Kai]

On the same note, does anyone know how to go about getting those big books of keyway/blank silhouettes I've seen in a couple videos? Didn't know if you needed to get one from each manufacturer, or if there was a compiled reference somewhere.


No good guesses on this one though, sorry.

[awol70]

On the same note, does anyone know how to go about getting those big books of keyway/blank silhouettes I've seen in a couple videos? Didn't know if you needed to get one from each manufacturer, or if there was a compiled reference somewhere.


No good guesses on this one though, sorry.

ilco makes a fantastic catalog

[awol70]

where did the lock come from?? some background knowledge would help.

i was given to me to i.d.
stumped a shop full of locksmiths....
i id'ed it as an am11oo series cylinder,having picked it open to reveal serrated spools/reg.
and serrated keypins...i then installed the core into an 1100 seris padlock,into which it fit and functioned perfectly...